Correct. You can even go back to things like the Shaker furniture or the history of the suit, or money itself. My point is that it is interesting how maximizing profit will always lead to thinsg merging and so eventually you'll reach a point of only one per category.
Think about it like this, 15~20 years ago, each company was building an operating system: Simbian, Windows Phone, Windows Mobile, various Linux based phones, Android, iOS, Blackberry OS, Palm OS, Firefox OS, Ubuntu's Unity Mobile... But then with the rise of iOS/Android, the cost of building something for each platform sky rocketed, you could have ten people each making the same tool for a different OS, or each making a different tool for the same OS. On the other hand it was easier to write one software for Android, and install Android everywhere, instead of having ten different apps for ten different OSes, and a company could install Android on their phones and have a smart phone, the other could make a whole operating system and only when all of the Anroid apps were available to their os it would have become feasible.
So efficiency and optimization always means the death of variety. You can have many programming languages with no good libraries, or a crappy JavaScript and C that have everything available to them... We all chose the latter.
But this was because software was expensive. Actually now this could be the only field where the trend could be reversed. You could make any niche platform, and porting apps over would be a few dollars and some minutes.
And are all Android phones the same? You can have one with liquid cooling of battery and turbo fan cooler for CPU! Same will be with the car. You can make so many different designs with standard parts!
Yeah but most of the phones I see have the same look, same camera array, same all-screen look and camera notch. Like how all laptops are almost the same.
The OS as far as I'm concerned is the same Android with its Material Design and UI rules. Sure, that makes using it easy and that is all that matters, but hey if you go one step more radical you'll see the difference between Windows Phone's Metro, and iOS, if you go even further you end up with forms like Smalltalk and even more so with things like Ivan Sutherland's Sketchpad. Things can be way, way more different but we get the same navigation bars, carts, boxes, icons, ideas... across all our software.
Kind of. Some are bad, some are even worse. We were told and thought that future will bring us mass customization. That was 30-40 years ago. And all we got are these cars, phones, computers, microwaves... looking the same, doing the same, costing the same, and all are equally useless and shitty. Such a future.
There are all sorts of cars, phones, appliances. People choose to buy the same biting stuff. Even colours, look at the parking lot! all cars are either black, white or gray.
Headlights have gone the other direction in my lifetime, to the point where I see more hazed and cracked lenses than I see good ones - bespoke replacements are too expensive to bother with.
Was chatting with the local hardware store owner a few weeks back about bulbs and solenoids - there are standards, but the breadth of different types in cars on the road means it isn't worth the shelf space to stock them - individual types move slowly while stocking enough variety to cover what the local market needs takes space away from more profitable things (like metric-thread fasteners).
Even nearby auto parts store end up ordering common parts from regional warehouses, putting them on roughly equal footing with RockAuto in terms of time to delivery (and of course at a disadvantage on price).
And this doesn't even get into truly unique parts like door latch motors or the various ICs that control various subsystems.
Frankly, it's a mess. Having a spare "parts car" sitting around is best if you have the space for it.
Sure, but to be fair, for cars manufactured across the same decade or two, at least going back to maybe the 50s or so (when 12V became "standard") and up to around 2010-ish - there was a small enough range of those things that I would have a reasonably good chance of getting on at the nearest gas station (well, "service station" since I'm in .au).
There were "step changes", like when headlights went from sealed beams to halogen bulbs in reflectors, You either had 6" or 8" sealed beams, or most likely H4 halogen bulbs (or a single filament bulb I've forgotten if you had separate low/high beam lights). If you had a headlight out, it mostly didn't matter what model car you had, or of it was a Ford or a VW or a Leyland, they all used one of 4 types of bulbs and they were all interchangeable.
In my head, and this is more motorcycle specific than car specific, but likely indicative across the entire automotive industry, it was the early 2000s when that started to change. My 1991 and 1998 Hondas and my 1999 Ducati and my 2004 Cagiva all used H4 headlight globes and the same 10/25W tail/brake light globes. My 2009 Yamaha was the first bike I owned where I had to buy headlight globes from Yamaha.
Once upon a time, headlight bulbs used to be more-standard than they are. Or at least: They were from my US perspective.
I've had cars with 9006/9007 headlight bulbs. Those were OK, I guess, other than the polycarbonate housings that turn into a clouded quagmire of shit when exposed to sunlight.
My 2012 Honda uses D2S headlight bulbs. That's a metal-halide part and it does not interchange with any other format, including other metal-halide parts. Each also requires both ballast and igniter assemblies. (Once lit, the bulb itself runs on [IIRC] 35V. But it takes a few kiloVolts to get it to initially arc over, vaporize some metallic salts, and start making light. And none of those volts are the ~12V that the car's electrical system produces.)
But at least it can use ~any regular D2S bulb. More-modern cars often use LED assemblies that aren't interchangeable between models at all.
But, yes: For decades in sealed-beam automobile world, we had a couple of sizes for round, and a couple of sizes for rectangular, and these sizes included the whole light-producing assembly, with focusing elements and the whole shebang. Some included a high-beam filament and some kept that separate, but: Any of these were very normal (standardized) things that anyone could pick up at ~any place selling auto parts and swap out with a screwdriver and whatever it takes to remove some trim.
(I've lived long enough to have seen sealed-beam headlight assemblies on shelves at small-town grocery stores. I have every confidence that if I rolled into the parking lot of such a store with a burnt-out halogen headlight in nineteen-eighty-something, then I'd be able to buy one and borrow enough basic hand tools to replace it in their parking lot in fairly short order. I'd probably also have paid Way Too Much for the headlight assembly itself, but I'd have been very grateful anyway. Convenience has a cost, even in matters of safety.)
I can think of at least 3 types of car battery terminal in-use today: The old top-post, GM's side-post, and Toyota's (close-but-not-the-same!) top-post. And that's just the terminals -- nevermind the different sizes and mounting configurations.
I can screw in any of a whole galaxy of spark plugs into my Honda's engine, but that doesn't mean that the pistons won't collide with them before reaching TDC. (Does it matter if the screw threads are compatible when the parts crash before they can be used?)
Do we really have to talk about the light bulbs and the fuses, too? It's pretty boring, but I'll be bored later if anyone really wants to get into that.
(I'd like some popcorn, first, if anyone feels like contributing something.)
Somehow, LEDs made lightbulbs even worse. I have 7 different types of lightbulbs I need in my house. 7! Two of them aren't even screws. Wait, no, there's 8, I forgot the LED strips as well with the JSTs. Actually, nine if you include USB. Wait, ten, because there's USB-A and USB-C.
I believe exactly the opposite. Assembly line manufacturing already made everything exactly the same, and it is soon ending. Well, not ending, but becoming less important. As general-purpose robotics ramps up and labor+NRE becomes cheaper we will be able to have more custom stuff made just for us, instead of accepting whatever some contract manufacturer in China decided to make in a factory for five different brands to white-label.
having a product with a quantity of 1 made for you is always going to be more expensive than making a million of a thing, this is economics independent of any technology
I'm not sure what general purpose robotics even is because the point of robotics is to not be general purpose, a general purpose robot is hardly faster than a general purpose human, the speed of the assembly line comes from recombining standardized parts, that's true for human or robotic artisanal vs assembly production
the bespoke sandwich shop is always going to be more expensive than the sandwich factory even if the former is operated by a bot
You're describing how robotics has been. But we are on the precipice of huge changes in robotics driven by AI.
Yes, assembly line stuff will always be cheaper, and we'll continue to use a lot of mass manufactured stuff. But we don't always pick the cheapest option for everything. As custom options become cheaper we'll pick them more often even if they don't reach parity with mass manufactured options.
To be blunt, this is part of the claim of a centralized command economy. This is part of why everyone wants to hate a centralized command economy. People like options.
But nothing in capitalism forces a diverse market, so it will find it's way to a centralized command economy if it can. Because it improves profit margins in exactly the same way it reduces "waste"
Evolution analogy - A design will converge until the environment changes or a superior design emerges from a different place, at which point a different design will be optimal.
Worth mentioning - evolution generally favors robustness over efficiency.
Is that a problem? It's a car, an ICE car's internals have been pretty much the same for decades. Except obviously the integration of electronics like the ECU.
Standardization of parts is good for the consumers, cheaper to build and cheaper to maintain.
For cars, it feels more like a generational statement than anything else.
I've been hearing statements like "cars all look the same, they're not like they used to be" for way, way more than 30 years.
It fits right in with "new music all sounds the same" and other easily-identified crotchety shit that some people seem to become prone to saying.
(For my own part: I can identify cars at a glance from many different eras, but I pay attention to that. I'm having a difficult time finding new music that I like, but I also don't try very hard on that front. I think that passenger planes have all looked the same for way more than 30 or 40 years, but I've never given them much attention at all -- flying has never been a regular feature of my lifestyle.)