How much would the Non-Recurrent Cost associated with designing a RISC-V CPU using this 2nm? EDA Tools, Photo-Masks, One Time Chip Design Engineer Cost, Simulation/Virtual Verification and so on. I mean every thing till tape-out.
Riscv doesn't need smaller nm. It just needs someone to actually design and release a good core design. 14nm (or 4 or anything in between) is perfectly suffient to make a Riscv chip 10x faster than any Riscv that currently exist.
14nm or so is kind of a sweet spot for general purpose chip design right now, because later nodes turn out to have higher overall per-transistor cost despite the improvement in density and area. Of course this may well change over time as even finer production nodes get developed and the existing nodes then move closer to the trailing edge.
The article linked in another comment pointed out that cost per transistor keeps falling, and it's just the fast increasing fixed costs that make it seem otherwise.
Interesting! Could you perhaps point me towards the source where I could read up on the state of the art of chip manufacturing and the implications coming from the respective manufacture processes?
There are already companies making huge, expensive, high-performance chips for x86 and ARM; chips which are operating at the limit of what's physically possible. There aren't chips which do that for RISC-V to my knowledge.
I don't see how that changes things. The end goal is the same. x86 and Arm are much further along, but that doesn't mean they "need" better lithography any more or less than RISC-V "needs" it.
Not a hardware person but I read in an interview with Jim Keller that ISA itself doesn't matter that much for performance.
>[Arguing about instruction sets] is a very sad story. It's not even a couple of dozen [op-codes] - 80% of core execution is only six instructions - you know, load, store, add, subtract, compare and branch. With those you have pretty much covered it. If you're writing in Perl or something, maybe call and return are more important than compare and branch. But instruction sets only matter a little bit - you can lose 10%, or 20%, [of performance] because you're missing instructions.[0]
I've cited this article a few times already (and seen others cite it) so if this is incorrect I hope someone could correct me here. (I have to assume that you also need some sort of SIMD/Vector these days, which RVA23 has anyway, but aside from that.)
I've also read that you can port CPU cores to a different ISAs pretty easily which is what PA Semi did when Apple bought them (M1 devs). So what seems to be missing is for a bunch of senior CPU developers who worked at AMD, Intel, PA Semi/Apple or ARM to just make one for RISC-V. Not sure if that is what you meant by IP here. Tenstorrent could be one such group, and they are building RISC-V CPUs, but their focus seems to be split between that and AI accelerators. China is another good candidate.
By IP I meant intellectual property. I was wondering how much designs or specific hardware developments that were essential for the performance boost (or: energy efficiency of chips, compute/W) as observed with the Apple M family of designs are locked down by patents.
Keller is just a god tier hardware guy - his ability to leverage deep understanding and then explain incredibly complex issues in a few sentences is incredible. Intel shot themselves in the foot when they let him go.
One of the things that could really help here is to create a license along the lines of "GPL for hardware" and then for a company like Google or Meta to release a design under it. The design wouldn't even have to be state of the art; something with performance equivalent to a ten year old x64 design would be valuable enough that people would use it for things if it was free.
But the larger value is that then people could use it as a starting point for modifications, which would in turn have to be released under the same license. Soon you have a diverse set of designs to choose from and we can start getting open hardware into common use because using any of those designs would be a cost savings over buying or designing something equivalent, but because the license requires an open design the user can then create custom firmware etc. and we might finally start to do something about the IoT security nightmare.
The RISC-V core designs that have emerged so far don't have nearly the amount of silicon dedicated to optimizing IPC as one sees in ARM, x86 and others: predictors, sophisticated caches, complex instruction dispatch, deep pipelines, etc. That stuff isn't provided with the RISC-V core designs you get for free or license at low cost, because it's fabulously expensive to develop, tied to the ISA and core designs for which it is created, and jealously guarded through IP law.
Will RISC-V get there eventually? People like Jim Keller are building companies around that goal. However, it will likely take years, at least, for RISC-V to approach parity.
Only reasons it wouldn't all boil down to, `it wouldn't matter`. E.G. If something else that does have it gets released to free as in beer levels why bother?
Unless modern civilization ends or an easier alternative is released eventually anything Open Source will get good enough.
Building a chip is really hard, and the companies that have experience all have their own architecture that they like and no reason to make a high performance design that competes with their regular chips.
