> It’s all CCS so it should just be a software update.
Nope.
CCS has to negotiate voltages with the attached vehicle. Unfortunately there isn't a standardized pack voltage and the range of what it can be is anywhere from 400 -> 900V.
That can mean new inverter hardware at a location to handle the varying range of voltages that come in. For a single manufacturer, it's easier as the cars and charging stations are more aligned on the supported voltages.
> Unfortunately there isn't a standardized pack voltage and the range of what it can be is anywhere from 400 -> 900V.
The CCS spec supports up to 1000 volts. All chargers support variable voltages.
A car's pack voltage also changes continuously across the charge curve as the battery's state of charge increases. The pack is at its lowest voltage at 0% state of charge and at its highest at 100%.
Here's an example of four cars charging, three at 400 volts and one at 800 volts. You can see how the voltage and amperage change across the charge curve:
Sorry to be pedantic but there are cars on the road where the voltages go below even 300 and the Lucid Air Grand Touring is over 900 when it gets near full. So chargers actually need to be able to handle more like 200-1000.
Nope.
CCS has to negotiate voltages with the attached vehicle. Unfortunately there isn't a standardized pack voltage and the range of what it can be is anywhere from 400 -> 900V.
That can mean new inverter hardware at a location to handle the varying range of voltages that come in. For a single manufacturer, it's easier as the cars and charging stations are more aligned on the supported voltages.