Any chance of open sourcing the model instructions for this? Do you feed it all the Phoenix/LiveView/Elixir docs, or have you written more specialised instructions?
I find Claude to have quite a bit of problems trying to navigate changesets + forms + streams in my codebase, just wondered if you had any tips of making it understand better :)
I'm a good engineer. I've done tons of mixes for records released both digitally and on vinyl or even tape. I never create different mixes for the formats - but I work with great mastering engineers and cutters who will create different masters for each format.
Thanks for commenting. I'm curious why you wouldn't master specifically to the format. There are so many nuances to vinyl with mistakes that can deeply impact sales when the job isn't done right.
For my own part, we had to recut the lacquers on a vinyl release five times to get it right, because the nature of the mix created a middling sound that bounced the needle around and caused intense surface sound. Once we solved that problem, the pressings sounded great.
Obviously with cassettes the profit margin isn't there to justify the additional expense of mastering, and to my ears cassette mastering rarely sounds different than the digital master (maybe some slightly different leveling). I believe NAC actually has a mastering guide to master to cassettes kicking around. But...not sure anyone follows it.
Just to be honest, I don't doubt you're a great engineer. But if you weren't mastering specific to format...I wouldn't hire you. Increasingly we've gone to vinyl-exclusive engineers on bigger projects, because it's so crucial to get the sound right at the start and poor vinyl mastering can cause problems months down the manufacturing line that are costly.
Are you confusing mixing and mastering, maybe? I just said that I don't MIX to different targets. I create the best mix I can, checking phase to mono every step of the way, then I deliver my mix to a mastering engineer who will create a master for digital as well as a master for vinyl. The vinyl master will sometimes be more agressively summed to mono in the bass if we're dealing with too much information in that registry. My point is you don't have to mix to different formats if your mix is good. Good mastering engineers and lacquer cutters will sort the rest for you! Maybe we just misunderstood eachother?
In the parent comment I was talking about mastering and you responding about mixing, so I assumed you meant mastering. Yes, there is always a single mix at least in my experience. That gets delivered to a mastering engineer who, imho, if they’re a good engineer, will master for vinyl and digital separately from the originally supplied mix. It is likely that some mastering engineers might create a digital master and then engineer for vinyl from that digital master but that’s not good engineering.
But yes I think we are on the same page and agree! A single mix. And from that mix are multiple master cuts specific to format.
It classified my mostly-bald, short hair as "shower cap". I help a coffee cup up to the camera that it called a plunger. There were some other bathroom-centric classifications as well, maybe it tries to guess the room type and common objects from the scene? FTR, I'm sitting in my open kitchen area, nothing around looks remotely like a bathroom.