509 points by signa11 31 days ago | hide | past | favorite | 330 comments

 This is interesting, but I have to quibble with this:> If you express this value in any other units, the magic immediately disappears. So, this is no coincidenceOrdinarily, this would be extremely indicative of a coincidence. If you’re looking for a heuristic for non-coincidences, “sticks around when you change units” is the one you want. This is just an unusual case where that heuristic fails.
 Not necessarily. One of the things I was taught when studying astronomy is that if you observe periodicity that is similar to a year or a day, that's probably not a coincidence, you probably failed to account for the earth's orbit or rotation.
 This is a good example, but actually this is exactly what GP was referring to. It is a coincidence that the thing you're observing is periodic with earth's rotation. Observing a similar thing from a satellite (allegorically the same as "changing bases") would remove the interesting periodicity.The earths rotation coincides with the phenomenon, so it's likely a coincidence.
 In the example case, the earth's rotation is producing the apparent observation: it's the cause, not a separate phenomenon that happens to coincide, or that might be indicative of a deeper relationship. For something to be a coincidence, it must be otherwise unconnected causally, which is not the case if the reason you found a ~24 hour period is that you forgot to account for the earth's rotation.
 I respectfully disagree (without attempting to say you're wrong!) about the definition of coincidence and the requirement of being non causally related. If I'm riding on a bus and the light poles going past line up with my music, that's a coincidence even though they are cause soley by the bus motion BPM matching an essentially random choice of song BPM.
 thayne 28 days ago What you're describing is a coincidence.What I'm describing is an artifact in your data that is caused by the motion of the earth.To give a more concrete example, suppose you measuring the brightness of a trans-neptunian object, and observe that the brightness changes slightly with a period of about 1 year. You might think it has a non-uniform albedo, and a rotational period of one year, when in reality, it is just brighter when the earth is closer to it.
 Actually no, the whole equation boils down to the definition of meter. Or rather, one of the earlier definitions.
 Yeah, I read the post. What I’m saying is “this relationship vanishes when you change units, so it must not be a coincidence” is a bad way to check for non-coincidences in general.For example, the speed of sound is almost exactly 3/4 cubits per millisecond. Why is it such a nice fraction? The magic disappears if you change units… (of course, I just spammed units at wolfram alpha until I found something mildly interesting).
 dr_dshiv 30 days ago Alpha brainwaves are almost exactly 10hz, in humans and mice. The typical walking frequency (for humans) is almost exactly 2hz (2 steps per second). And the best selling popular music rhythm is 2hz (120bpm) [1].Perhaps seconds were originally defined by the duration of a human pace (i.e. 2 steps). These are determined by the oscillations of central pattern generators in the spinal cord. One might suspect that these are further harmonically linked to alpha wave generators. In any case, 120bpm music would resonate and entrain intrinsic walking pattern generators—this resonance appears to make us more likely to move and dance.Or it’s just a coincidence.
 Well, a second is also a pretty good approximate resting heart rate (60 bpm)
 JadeNB 30 days ago > Well, a second is also a pretty good approximate resting heart rate (60 bpm)I'm sorry to be the kind of person who feels compelled to make this comment, but you mean a Hertz, not a second.
 xapata 29 days ago You're right. Thanks for being that guy!
 aydyn 30 days ago Youre right, you should be sorry. Dont be that guy.
 panarky 30 days ago Another bad way to check for non-coincidences is to use a value like g which changes depending on your location.Pi is the same everywhere in the universe.g on Earth: 9.8 m/s²g on Earth's moon: 1.62 m/s²g on Mars: 3.71 m/s²g on Jupiter: 24.79 m/s²g on Pluto: 0.62 m/s²g on the Sun: 274 m/s²(Jupiter's estimate for g is at the cloud tops, and the Sun's is for the photosphere, as neither body has a solid surface.)
 stkdump 30 days ago My physics prof said g is actually a vector field. Because the acceleration has a direction and both magnitude and direction vary from point to point.
 Absolutely true on astronomical scales.An unnecessary complication if you're dropping a brick out of a window.
 wongarsu 30 days ago It's funny how much of physics we do assuming a flat earth.If you did it "properly" you would calculate the orbit of the brick (assuming earth was a point mass), then find the intersection between that orbit and earth's surface. But for small speeds and distances you can just assume g points down as it would in a flat earth
 dudinax 29 days ago To do it properly you have to account for the gravitational pull of the building.
 jvanderbot 30 days ago Your physics Prof is correct of course, and so is GP. "Standard" values for g exist for these bodies, but it also varies everywhere.
 DistractionRect 30 days ago This is correct, gravitational constants are a good approximation/simplification since the mass of solar bodies is usually orders of magnitude greater than the other bodies in the problem, and displacement over the course of the problem is usually orders of magnitude smaller than absolute distance between them.In other words, we assume spherical cows until that approximation no longer works.
 TheCleric 30 days ago I volunteer for the Mars mission as a weight loss tool.
 Surviving on Mars will probably involve some mass loss, too.
 TeMPOraL 30 days ago With the current technology, even getting on a rocket to Mars will involve some weight loss - the mass budget is tight, and each kilogram they can trim off the crew bodies is a kilogram that could be put towards fuel, life support, or scientific equipment.
 TheRealPomax 30 days ago Fun fact: pi is both the same, and not the same, in all of those places, too.Because geometry.If you consider pi to just be a convenient name for a fixed numerical constant based on a particular identity found in Euclidean space, then yes: by definition it's the same everywhere because pi is just an alias for a very specific number.And that sentence already tells us it's not really a "universal" constant: it's a mathematical constant so it's only constant given some very particular preconditions. In this case, it's only our trusty 3.1415etc given the precondition that we're working in Euclidean space. If someone is doing math based on non-Euclidean spaces they're probably not working with the same pi. In fact, rather than merely being a different value, the pi they're working with might not even be constant, even if in formulae it cancels out as if it were.As one of those "I got called by the principal because my kid talked back to the teacher, except my kid was right": draw a circle on a sphere. That circle has a curved diameter that is bigger than if you drew it on a flat sheet of paper. The ratio of the circle circumference to its diameter is less than 3.1415etc, so is that a different pi? You bet it is: that's the pi associated with that particular non-Euclidean, closed 2D plane.So is pi the same everywhere in the universe? Ehhhhhhhh it depends entirely on who's using it =D
 mr_mitm 30 days ago In non-euclidean spaces, your definition of pi wouldn't even be a value. It's not well defined because the ratio of circumference to diameter of a circle is dependent on the size of the circle and the curvature inside the circle.It's probably true that it's only well defined in euclidean space. Your relaxed definition, which I have never seen before, is not very useful.
 _a_a_a_ 30 days ago I don't agree, I thought what he said was very interesting. It never occurred to me that pi might vary, and over a non-flat space I can see what they're saying. I think it's intrinsically interesting simply because it breaks one of my preconceptions, that pi is a constant. Talking about it being 'not very useful' just seems far too casually dismissive.
 mr_mitm 30 days ago Pi doesn't vary. The ratio of circumference to diameter of a circle may vary depending on the geometry. Clearly everyone means euclidean space unless specified otherwise. Any other interpretation will only lead to problems, which is why it's not useful. There is really no ambiguity about this in mathematics. Mathematicians still use the pi symbol as a constant when they compute the circumference of a circle in a given geometry as a function of the radius.
 > Pi doesn't vary. The ratio of circumference to diameter of a circle may vary depending on the geometry.Can you share some place where Pi isn't defined exclusively as being "the ratio of circumference to diameter of a circle"? I have never heard any other definition in my life, and couldn't find any other through the first few Google results
 _a_a_a_ 30 days ago "This definition of π implicitly makes use of flat (Euclidean) geometry; although the notion of a circle can be extended to any curve (non-Euclidean) geometry, these new circles will no longer satisfy the formula π = C / d"https://en.wikipedia.org/wiki/Pi
 rjmunro 25 days ago Pi is the "the ratio of circumference to diameter of a circle in Euclidian space". Everyone agrees that. What people are arguing is that when you have a circle in non-Euclidian space, so that the ratio of it's circumference to diameter is different, do we still call this new ratio Pi.Most people would argue that we don't. They say "the ratio is not Pi" rather than "Pi is a different value".
 8note 30 days ago Similarly, g depends on the geometry, and g is a constant 0 for Euclidean space
 TheRealPomax 30 days ago There is no "clearly" in Math. The fact that pi is a constant while at the same time not being "the same constant" in all spaces, and not even being "a single value, even if we alias it as the symbol pi" is what makes it a fun fact.Heaven forbid people learn something about math that extends beyond the obvious, how dare they!
 > There is no "clearly" in Math.Sure there is. You don’t expect a paper to explain that the numbers are in decimal and not hexadecimal.
 I don't know which ones you read so I can't comment on that, but the ones I read most definitely specify which fields of math they apply to, and which axioms are assumed true before doing the work, because the math is meaningless without that?Papers on non-Euclidean spaces always call that out, because it changes which steps can be assumed safe in a proof, and which need a hell of a lot of motivation.And of course, that said: yeah, there are papers for proofs about things normally associated with decimal numbers that explicit call out that the numbers they're going to be using are actually in a different base, and you're just going to have to follow along. https://en.wikipedia.org/wiki/Conway_base_13_function is probably the most famous example?
 _a_a_a_ 30 days ago Ur being rather snotty about this. I've just realised something important which is so obvious to you that you consider it trivial, but it's not. I realised something important today, you might just want to feel pleased for me, and a bit pleased that the world is a little less ignorant today...? Or not?
 mr_mitm 29 days ago Sorry for coming off as snotty. It wasn't my intention, I thought my statements were rather matter of fact. It's possible that after having attended two lectures on differential geometry I have forgotten that some of these things like circumference ratios and sum of angles of triangles being different in a curved geometry are not obvious to every one. I'm glad you learned something!Edit: This picture should make it pretty clear for anyone who is new to this concept: https://en.wikipedia.org/wiki/Non-Euclidean_geometry#/media/...
 _a_a_a_ 29 days ago No probs, and yes I certainly learnt something important, thanks.
 withinboredom 30 days ago This whole conversation is painful to read:1. Your parent was talking about projections from one space to another and getting it confused.2. Pi is pi and their non-Euclidean pi is still pi (unless you want to argue that a circle drawn on the earth’s surface has a different value of pi).The problem comes down to projections, then all bets are off.
 Yes. That's what makes it a fun fact. Most people never even learn about non-euclidean math, and this is the kind of "wow I never even thought about this" that people should be able to learn about in a comment thread.Calling it painful to read is downright weird. Pi, the constant, has one value, everywhere. So now let's learn about what pi can also be and how that value is not universal.
 It isn't a "fun fact" ... it's plainly incorrect.π never changes its value. Ever. It is a constant in mathematics, no matter the geometry. However, π can have different ratios in other geometries, but it will still be ~3.14.It is painful because this statement:> draw a circle on a sphere. That circle has a curved diameter that is bigger than if you drew it on a flat sheet of paper. The ratio of the circle circumference to its diameter is less than 3.1415etc, so is that a different pi? You bet it is: that's the pi associated with that particular non-Euclidean, closed 2D plane.The problem here is *projections*. If you project non-Euclidean space onto Euclidean space, you end up with some seemingly nonsensical things, like straight lines that get projected into arcs. This is your problem. You projected a curved line from non-Euclidean space onto Euclidean space and got an arc, but didn't account for the curvature of your "real non-Euclidean space" and thus ended up with an invalid value for π. If you got something that isn't ~3.14, then you did the math wrong somewhere along the way.
 It doesn't have anything to do with projections.Let's say you live in a non-flat space. You come up with the idea of a "circle" with the usual definition: the set of points on the same plane equidistant from a central point.You then trace along the circle and measure the length, and compare it to the length of the diameter. It turns out that this ratio changes as a function of the diameter. This truth is inherent to curved spaces themselves, and is not an artifact of choosing to describe the space using a projection.The definition of pi in this world is no longer the invariant ratio of diameter to circumference. You can still recover pi by taking the limit of this ratio as the diameter length goes to zero. But perhaps mathematicians in this world would (justifiably) not see pi as such a fundamental number.Now back to GP's example: people living on a sphere (like us) are analogous to inhabitants of a non-Euclidean space. The surface of Earth is analogous to 3-space, and the curvature of Earth is analogous to the curvature of space.And indeed, if you draw real-life larger and larger circles on our planet, you will find that the ratio of circumference to diameter is smaller than pi. For example, if you start at some point on the Earth (say, the North pole) and trace out a circle 100 miles distant from it, you will find that the circumference of that circle (as measured by walking around that circle) is a little bit _less_ than pi x 100 miles.Again, we have done no "projection" here. We've limited ourselves to operations that are fairly natural from the perspective of a mathematician living in that space, such as measuring lengths.The fact that large circle circumferences measure less than pi x diameter on Earth did not change how we developed math, likely because you only notice start to notice this effect with extremely large (relative to us) circles.But perhaps the inhabitants of a non-Euclidean space that was much more highly curved would notice it much earlier, and it would affect their development of maths, such that the number pi is held in lower regard.
 spotplay 29 days ago Thanks for the original comment—I picked up something new that I hadn't considered before.That said, you could spin this by suggesting that the mathematician living in that non-Euclidean space might also have a different perspective on numbers. If we assume pi is still constant for him, then the numbers he's always known could be shifting in value but maybe that's a stretch.
 travisjungroth 30 days ago Just sounds like you’ve confused yourself. It’s like spinning in circles and acting like no one else knows which way is up.That isn’t a different pi. That’s a different ratio. Your hint is that there are ways to calculate pi besides the ratio of a circle’s circumference to its diameter. This constant folks have named pi shows up in situations besides Euclidean space.
 Good job, you completely missed the point where I explain that pi, the constant, is a constant. And that "pi, if considered a ratio" (you know, that thing we did to originally discover pi) is not the same as "pi, the constant".Language skills matter in Math just as much as they do in regular discourse. Arguably moreso: how you define something determines what you can then do with it, and that applies to everything from whether "parallel lines can cross" (what?) to whether divergent series can be mapped to a single number (what??) to what value the circle circumference ratio is and whether you can call that pi (you can) and whether that makes sense (less so, but still yes in some cases).
 I haven’t missed your point. I’ve criticized it.You’re treating your non-consensus definition not as a hypothetical, but as a fact. Your comment started with “fun fact”.
 matt-attack 29 days ago FWIW I enjoyed your original comment :)
 Tainnor 30 days ago Modern mathematics is more likely than not going to define pi as twice the unique zero of cos between 0 and 2, and cos can be defined via its power series or via the exp function (if you use complex numbers). None of this involves geometry whatsoever.
 aydyn 30 days ago What do you mean? Cos is an inherently geometric function.
 IsTom 30 days ago There are many equivalent definitions and many of them do not refer to geometry at all. If you don't want to go through cos you can always define pi as sqrt(6 * sum from 1 to inf 1/n^2).
 TeMPOraL 30 days ago You can also define it as `3.14159...` just because. Obviously, a π definition entirely divorced from geometry becomes irrelevant to it - instead, in geometry, you'd still use π = circumference/diameter, or π = whatever(cos), and those values would happen to be the same as a non-geometric π, but only if the geometric π is the one from Euclidean geometry.
 Tainnor 30 days ago > You can also define it as `3.14159...` just because.That's not a rigorous definition, though, because it doesn't tell you what those "..." expand to.
 Tainnor 30 days ago To quote myself:> cos can be defined via its power series or via the exp function (if you use complex numbers).
 aydyn 29 days ago Any function can be defined as a taylor series. That is not at all an argument against its geometric nature.
 Tainnor 29 days ago > Any function can be defined as a taylor series.First of all, that's wrong. It's only true for analytic functions.Second of all, sin and cos appear in all sorts of contexts that are not primarily geometric (such as harmonic analysis).Lean's mathlib defines pi precisely the way I've described it - cos is defined via exp, and pi is defined as the unique zero in [0,2]
 aydyn 29 days ago > Lean's mathlib defines pi precisely the way I've described it - cos is defined via exp, and pi is defined as the unique zero in [0,2]Which, _again_ is a taylor series. A function having a taylor series does not argue against the geometric nature of cos.> Second of all, sin and cos appear in all sorts of contexts that are not primarily geometric (such as harmonic analysis).I'm not sure how you can say that, there is so much material describing the geometric nature and interpretation of fourier/laplace transforms.
 Tainnor 29 days ago > Which, _again_ is a taylor series.Mathlib defines cos x = (exp(ix)+exp(-ix))/2, which is not a definition via Taylor series (even though you can derive the Taylor series of cos quite easily from it). exp is defined as a Taylor series in mathlib, but it might just as easily be defined as the unique solution of a particular IVP, etc. Regardless of this, I have no idea why to you seemingly a definition via Taylor series is not a "true" definition, you could probably crack open half a dozen (rigorous) real or complex analysis texts, they're likely to define sin and cos in some such way (or, alternatively, as the single set of functions satisfying certain axioms), because defining them via geometry and making this rigorous is much harder.I can't argue whether cos has a "geometric nature" or not, because I don't know what that means. Undoubtedly cos is useful in geometry. It is, however, used in a wide range of other domains that make absolutely no reference to geometry. mathlib's definition of cos doesn't import a single geometry definition or theorem.Remember that the starting point of this discussion was that somebody was claiming that "pi is different in non-Euclidean geometry", which, no, even in a completely different geometry, the trigonometric functions would be useful and pi is closely related to them.
 aydyn 29 days ago > Mathlib defines cos x = (exp(ix)+exp(-ix))/2I am not understanding why you think this is at all relevant.Its like saying a^2 + b^2 = c^2 is not geometric because it doesnt make reference to triangles. But at the end of the day, everyone understands Pythagorean theorem to be an inherently geometric equation, because geomtry is just equations and numbers.I realize to some extent this is all subjective, but to me its insane to claim that cos is not an inherently geometric function. Agree to disagree.
 Tainnor 28 days ago You're analogy is flawed. Pythagoras' theorem is about right triangles. "a^2+b^2=c^2" isn't about triangles, it's not even a theorem, it's simply an equation (typically a diophantine one) that is satisfied by some numbers but not others. Something which typically belongs to number theory. Obviously the two things are closely related (which is the beauty of mathematics - there are a lot of connections between very different fields).But really, I'll refer again to the part of my previous reply where I contextualise why I wrote what I wrote and how that answers the question of whether pi is somehow arbitrary due to the fact that we usually think of space as Euclidean: it's not.
 Waterluvian 30 days ago Or the speed of light being almost a sweet 300 million m/s.Or after-atmosphere insolation being somewhat on average 1kw/m2.
 ta1243 30 days ago I always find insolation and insulation to be such an interesting pair of wordsI guess the equivelent of "change the units" is "change the language".French: insolation et isolationGerman: Sonneneinstrahlung / IsolierungSpanish: insolación / aislamientoChinese: 日照 / 绝缘I guess coincidence
 insolation < Latin sol, solis m "sun"insulation < Latin insula, -ae f "island" (apparently nobody knows where this one comes from)isolation < French isolation < Italian isolare < isola < Vulgar Latin *isula < Latin insula, -ae fSpanish aislamiento < aislar < isla < Vulgar Latin *isula < Latin insula, -ae fOh and the English island never had an s sound, but is spelled like that because of confusion with isle, which is an unrelated borrowing from Old French (île in modern French, with the diacritic signifying a lost s which was apparently already questionable at the time it was borrowed), ultimately also from Latin insula.
 CRConrad 23 days ago > Oh and the English island never had an s sound, but is spelled like that because of confusion with isleSo the German cognate (I assume) Eiland probably hasn't had one either. Makes sense, since the Nordic Eya / Øy / Ö never felt like they should, and they must be just northern variants that lack the -land (literally the same in English) suffix.
 nneonneo 30 days ago Usefully, the speed of light is extremely close to one foot per nanosecond. This makes reasoning about things like light propagation delays in circuits much easier.
 I really wish we had known this back before it was way too late to seriously change our units around. It would mean that our SI length units wouldn't have to have some absolutely ridiculous denominator to derive them from physical constants, and also the term "metric foot" is pretty fun.
 cozzyd 30 days ago I use the term "natural foot." It's very useful in simulations.
 tomjakubowski 30 days ago Fun, and poetic too
 kuschku 30 days ago See, the issue with "foot" is that different people use different body parts to measure length. Germany used the "Elle", which is the distance between wrist and elbow, or roughly one foot. Other regions used the foot or the cubit instead.The primary advantage of the SI system is that it has only ONE length unit that you add prefixes to.
 I’m saying that the single SI length unit could have been defined precisely as the light nanosecond, or “metric foot”, had people known that that length fit closely to an existing unit back around 1790.There would still be one unit with prefixes added, but that unit would have a really clean correspondence to physics rather than a hacky conversion factor.But you have to go back that far in time for it to work, because it’s a fraction of a percent off of the current standard foot. They were happy to make those kinds of changes (as in the case of defining the meter to be ~0.51 toises) back when all of the existing measurements were pretty imprecise to begin with.Of course, that’s why it could never have worked out this way. By the time we could measure a light nanosecond, we were already committed to defining units very closely to their existing usage.
 kuschku 29 days ago Even if you made that kind of definition, it wouldn't have been that simple. Would you have used metric seconds or babylonian seconds?
 mistercow 30 days ago > Or after-atmosphere insolation being somewhat on average 1kw/m2.I’m kind of inclined to say that this one isn’t so much of a coincidence as it is another implicit “unit” in the form of a rule of thumb. Peak insolation is so variable that giving a precise value isn’t really useful; you’re going to be using that in rough calculations anyway, so we might as well have a “unit” which cancels nicely. The only thing that’s missing is a catchy name for the derived unit. I propose “solatrons”.
 kragen 29 days ago units(1) calls it `solarconstant` or `solarirradiance` but that's the quantity above the atmosphere. the same term is sometimes used for the quantity below the atmosphere: https://en.wikipedia.org/wiki/Solar_constant and of course that depends on exactly how much atmosphere you're belowin that sense, oddly enough, the solar constant is not very constant at all
 ValentinA23 30 days ago There is relationship between the metric system and the French royal system. The units used in this system have a fibonacci-like relationship where unit n = unit n-1 + unit n-2.`````` palm : 7,64 cm span : 12,36 cm handspan : 20 cm foot : 32,36 cm cubit: 52,36 cm `````` cubit/foot =~ 1,618 =~ phi, el famoso Golden ratio. foot/handspan =~ phi too. And so on.From this it turns out that 1 meter = 1/5 of one handspan = 1/5 x cubit/phi^2Another way to get at it is to define the cubit as π/6 meters (= 0.52359877559). From this we can tell that1cbt = π/6mπ meters = 6 cubits
 euroderf 30 days ago 32 meters is 35 yards, to within about an eighth of an inch. How's that grab you ?
 I wonder if this is related, but imperial measurements with a 5 in the numerator (and a power of two in the denominator) are generally just under a power of two number of millimeters.The reason is fun, and as far as I know, historically unintentional. To convert from 5/(2^n) inches to mm, we multiply by 25.4 mm/in. So we get 5*25.4/(2^n) mm, or 127/(2^n) mm. This is just under (2^7)/(2^n) mm, which simplifies to 2^(7 - n) mm.This is actually super handy if you're a maker in North America, and you want to use metric in CAD, but source local hardware. Stock up on 5/16" and 5/8" bolts, and just slap 8 mm and 16 mm holes in your designs, and your bolts will fit with just a little bit of slop.
 euroderf 30 days ago So the error is 1.6%. Acceptable for everyday hardware I guess.
 GoldenRacer 30 days ago My favorite is 1 mile = phi kilometers with <1% error
 baliex 30 days ago That one’s useful too. If you know a few Fibonacci numbers you can convert miles to kilometres and vice versa with ease.1, 1, 2, 3, 5, 8, 13, 21, 34, 55 …21 km is ~13 miles, 13 km is ~8 miles, etc.A 26 mile marathon? Must be ~42km.Same for speed limits too; 34 mph is ~55 kmh
 eesmith 30 days ago I use that approximation, via the Fibonacci sequence, to translate between miles and km. 13 miles ~ 21 km (actually 20.921470).My favorite approximation is π·E7 = 31415926.5... , which is a <1% error from the number of seconds in a year.
 ... you all realize that phi is barely a better approximation than 8/5, right? 1.6 vs 1.609 (km in a mile) vs 1.618?(8/5)/(1 mile/1 km) = 0.9942; (1 mile/1 km)/phi = 0.9946. You're making things way harder on yourself for essentially no improvement in precision, especially when you're just rounding to the nearest whole number.
 eesmith 29 days ago That tells me you haven't memorized the first ten or twelve terms of the Fibonacci sequence.
 saalweachter 30 days ago 1 km = 5 furlong, with < 1% error.
 saghm 30 days ago Reminds me of https://xkcd.com/687/
 jncfhnb 31 days ago X^2 is a lot more interesting than x*0.0000743 or whatever it is
 Ok, then by that thinking, you should find it really interesting that Earth escape velocity is almost exactly ϕ^4 miles per second.In fact, adding exponents here objectively makes it less interesting, because it increases the search space for coincidences.What makes the case in the post most interesting to me is that it looks at first glance like it must be a coincidence, and then it turns out not to be.
 jncfhnb 29 days ago You would need a compelling argument why x^4 is interesting. Especially something like the golden ratio.Not a long of things go to the fourth power in equations we need to use. Pi^2 directly features in periodicity
 satvikpendem 31 days ago Why is it more interesting? Is it just more interesting because we use such bases, or can it be interesting inherently? That is the question that is being asked, and why some say it's merely a coincidence.
 jncfhnb 30 days ago Well every number is the product of another number and some coefficient. If it’s a nice clean number then that implies it could be the result of some scaling unit conversion. But that should be sort of apparent. And it’s not super interesting if true.If a number is another number squared then that implies some sort of mechanistic relationship. Especially when the number is pi, which suggests there’s a geometric intuition to understanding the definition.
 In other bases, it does not actually imply much, even if it were squared. Maybe it really does make sense if it existed in base 10 but I cannot see much if it were part of other bases.
 antonvs 30 days ago > What I’m saying is “this relationship vanishes when you change units, so it must not be a coincidence” is a bad way to check for non-coincidences in general.Yeah, it was a strange claim, which makes me think that the author may have had his conclusion in mind when writing this. I.e. what he meant to say may have been something more like:"The relationship vanishes when you change units, which suggests the possibility that the relationship is a function of the unit definitions... and therefore not a coincidence."
 brians 31 days ago Because the cubit is a measure of what a body can reach
 I never thought of the cubit this way. It's an interesting idea, but the cubit is the length of a forearm, whereas you can reach around yourself in a circle the length of your extended arm, from finger tip to shoulder.That would be somewhere between 1.5 to 2 cubits for people whose forearm is about a cubit long.I think the cubit is mainly a measure of one winding of rope around your forearm. That way you can count the number of windings as you're taking rope from the spool. This is the natural way a lot of us wind up electrical cables, and I'm sure it was natural back in the day when builders didn't have access to precise cubit sticks.I don't see the connection with the units and sound that you're making. But it is kind of interesting to know that sound travels about 3/4 of a forearm length per millisecond. That's something that's easy to estimate in a physical space.
 Bjartr 31 days ago How does that explain the relationship to the speed of sound?
 A bit out of topic, howeverhttps://www.youtube.com/watch?v=0xOGeZt71sgNote: I'm more inclined to think this is a coincidence given that it establishes a link between the most commented text and the the most commented building in history. However I don't think these kind of relationships based on "magic thought" should be discarded right away just because they are coincidences, and I'd be very interested in an algorithm that automatically finds them.
 chrz 30 days ago Im wondering is there connection or not? We use distance unit to get to π number, whatever the distance unit is right? We get π from circumference to diameter ratio, so however long the meter is the π in your distance unit is same ratio
 KeplerBoy 30 days ago It does not? Pi has nothing to do with our arbitrary unit system.
 Pi is related to the circumference of a circle; the meter was originally defined as a portion of the circumference of the Earth, which can be approximated as a circle."The meter was originally defined as one ten-millionth of the distance between the North Pole and the equator, along a line that passes through Paris."
 But that connection actually is a coincidence. From what I can tell, when they standardized the meter, they were specifically going for something close to half of a toise, which was the unit defined as two pendulum seconds. So they searched about for something that could be measured repeatably and land on something close to a power of ten multiple of their target unit. The relationship to a circle there doesn’t have anything to do with the pi^2 thing.
 GuB-42 30 days ago Not a coincidence. They defined the meter from the second using the pendulum formula, and the pandulum formula has a pi in it, so pi is going to appear somewhere. The reason there is pi is probably because a pendulum is defined by its length and follows a circular motion that has the length as its radius.We could imagine removing pi from the pendulum equation, but that would mean putting it back elsewhere, which would be inconvenient.
 Right, that connection is not a coincidence. The connection the previous commenter drew between the meter, pi, and the circumference of the earth is a coincidence.
 hanche 30 days ago > The reason there is pi is probably because a pendulum is defined by its length and follows a circular motion that has the length as its radius.It’s not quite that easy: For small excursions x the equation of motion boils down to x’’+(g/L)x=0. There is not a π in sight there! But the solution has the form x=cos(√(g/L)t+φ), with a half period T=π√(L/g), thus bringing π back in the picture. So indeed not a coincidence.
 mannykannot 30 days ago It was news to me, but that's what the article says, and it is supported by by Wikipedia, at least. [1]In addition, I feel the article glosses over the definition of the second. At the time, it was a subdivision of the rotational period of the earth (mostly, with about 1% contribution from the earth's orbital period, resulting in the sidereal and and solar days being slightly different.) Clearly, the Earth's rotational period can (and does) vary independently of the factors (mass and radius) determining the magnitude of g.The adoption of the current definition of the second in terms of cesium atom transitions looks like a parallel case of finding a standard that could be measured repeatably (with accuracy) and be close to the target unit - though it is, of course, a much more universal measure than is the meridional meter.
 mistercow 30 days ago Can you explain what you’re taking issue with in the post, then? Because it specifically lays out how the historical relationship between the meter and the second does in fact involve pi^2 and the force of gravity on earth.(Granted, from what I can tell, it’s waving away a few details. It was the toise which was based on the seconds pendulum, and then the meter was later defined to roughly fit half a toise.)
 eigenket 30 days ago pi is always just pi, but g may be defined in terms of the meter.
 sure, that's the entire point.heck, g is not even a constant, it just happens to measure to roughly 9.8 m/s² at most places around here.
 nextaccountic 30 days ago It does, and the formula in the post explains the connection
 I'm surprised at the number of people disagreeing with your quibble. I had the exact same thought as you!If pi^2 were _exactly_ g, and the "magic" disappeared in different units, THEN we could say "so this is no coincidence" and we could conclude that it has to be related to the units themselves.But since pi^2 is only roughly equal to g, and the magic disappears in different units, I would likely attribute it to coincidence if I hadn't read the article.
 It would be useful if people carried around some card with all the information that they understood on it, since opinions are largely symptoms of this.In almost all cases any apparent phenomenon specific to one system of measurement is clearly a coincidence, since reality is definable as that which is independent of measurement.
 > since reality is definable as that which is independent of measurement.In terms of quantum mechanics, would that mean the wave function is real until it collapses due to measurement? Or am I misunderstanding your use of measurement there?Something about that is sticking in my mind in an odd way, but I can't put my finger on exactly what it is - which is intriguing.
 Measurement can change what is measured, but it doesnt change it from illusion to reality.I cannot measure santa clause into existence. But I can change the temperature of some water by measuring it with a very hot thermometer.That measurement changes what is measured is the norm in almost all cases, except in classical physics which describes highly simplified highly controlled experiments. The only 'unusual' thing about QM is its a case in physics where measurement necessarily changes the system, but this is extremely common in every other area. It is more unusual that in classical physics, measurement doesn't change the system.
 Agreed. Irrespective of how the story is later developed, "So, this is no coincidence", is a baffling thing to put immediately after apparently demonstrating a coincidence!
 john-aj 30 days ago I agree. But if you remove the "so", there is no contradiction. It is possible the author used "so" not to mean "in other words", but simply as a relatively meaningless discourse marker.
 Huh, interesting point. Writing unambiguously is ridiculously hard.
 The comma differentiates. The comma indicates a short pause and a certain intonation in speech (the period means a longer pause and a different intonation). If you say that sentence with and without a pause/comma, you'll see (hear) that the sentence is correct. Reading unambiguously is also hard.
 The problem with that is that writers are not consistent with comma usage either, particularly when it comes to informal writing, where prescriptive rules are out the window anyway. And I would argue that it would be a bit of a norm violation even in informal writing to introduce this new point at the end of a paragraph rather than starting a new one, which makes me think that that was not the author's intent.
 phkahler 31 days ago Doesn't the relationship hold if we change units? It seems like it must.When I worked with electric water pumps I loved that power can be easily calculates from electrical, mechanical, and fluid measurements in the same way if you use the right units. VoltsAmps, torquerad/sec, pressure*flow_rate all give watts.
 eigenket 30 days ago Nope, it completely vanishes in other units. If you do all your distance measurements in feet, for example, the value of pi is still about 3.14 but the acceleration due to gravity at the earth's surface is about 32 feet s^(-2). If you do your distance measurements in furlongs and your time measurements in hours then the acceleration due to gravity becomes about 630,000 furlongs per hour squared and pi (of course) doesn't change.
 Only because you're using metric seconds instead of "imperial seconds" (the time it takes for a 1 foot long pendulum to complete a full oscillation).
 eigenket 30 days ago Sure, if you change either of the units you can always change the other one to fix the equation again.
 koolala 30 days ago But does it work when you use the right Imperial technique?
 If I come up with my own measuring unit, let's call it the sneezle (whatever the actual length I assign to it) I will be able to also define a duration unit (say, the snifflebeat) based on the time it takes for a pendulum one sneezle long to complete a full oscillation, and vice versa I can define the sneezle by adjusting the length of a pendulum so that it oscillates in two snifflebeats. Here are the maths:T = 2π√(l/g)T/2π = √(l/g)(T/2π)^2=l/gg = l/(T/2π)^2g = l/(T^2/4π^2) = 4π^2xl/T^2Now substitue T with 2 and l with 1 an you getg = 4π^2x1/2^2 = π^2It doesn't matter what the pair of units assigned to T and l are. However, they'll be interrelated.There is nothing arbitrary, and no coincidences behind g =~ π^2. It just requires to do some history of metrology and some basic maths/physics.If you want to discuss coincidences, may I suggest you to comment on this remark I made and which hasn't received any attention yet ?https://news.ycombinator.com/item?id=41209612
 koolala 27 days ago Different planets, Different Sneezle length, Same Sneezle BeatI'll try to see these units you linked thanks
 mannykannot 30 days ago This is not quite the same situation, as you are calculating a value having a dimension (that of power, or energy per second) three different ways using a single consistent system of units, and getting a result demonstrating / conforming to the conservation of energy. If you were to perform one of these calculations in British imperial units (such as from pressure in stones per square hand and rate of flow in slugs per fortnight) you would get a different numerical value (I think!) that nonetheless represents the same power expressed in different units. The article, however, is discussing a dimensionless ratio between a dimensionless constant and a physical measurement that is specific to one particular planet.
 usaar333 30 days ago No, the equality requires the length of a 2 second period pendulum be g / pi^2. Change your definition of length - that no longer holds true.g in imperial units is 32 after all. g has units; pi does not
 lupire 30 days ago A more natural way to say it is that equality requires that the unit of length is the length of an arbitrary pendulum and the unit of time is the half-period of the same pendulum.The pendulum is a device that relates pi to gravity.
 koolala 30 days ago Sounds universal. Get a different value on the Moon? Of course... pi squares differently on the moon :)
 The arbitrary length pendulum with a period of 2 seconds which is your unit of length, (or 1 Catholic meter) is much shorter on the moon. In local Catholic meters gravity would be pi squared Catholic meters / second. As it would on any planet.
 koolala 27 days ago I think I understand. Distance scales with Planet Size? That actually makes a lot of sense.
 phkahler 30 days ago The equation holds in imperial units as well. The length of the 2 second pendulum needs to be in feet AND the value of g in ft/sec2.
 π^2 ≈ 32 to you?
 phkahler 30 days ago Solving the equation for pi we get:PI = sqrt(g/L)g = 9.81. L=1org = 32.174. L=3.174Either way works to approximately pi. There is a particular length where it works out exactly to pi which is about 3.2 feet, or about 1 meter. My point was that equations like that remain true regardless of units.The reason pi squared is approximately g is that the L required for a pendulum of 2 seconds period is approximately 1 meter.
 koolala 30 days ago Replace s in your calculation with imperial s instead of metric s and it isn't imperial feet per metric seconds.
 Imperial seconds were very, very close to metric seconds.
 lupire 30 days ago The "magic" doesn't disappear in "any" other units.Period = 2π√(length/g)So the "magic" holds in any units where the unit of time is the period of a pendulum with unit length.
 ycui1986 30 days ago I think what the author want to convey is that the metric system was designed based on the assumption that pi^2 = g. The assumption pi^2 = g is one of the source of the metric system (at least for the relationship between meter and second). The deviation was due to the size of earth being incorrectly measured by French in the original expedition.)
 yunohn 30 days ago I don’t agree with this. You could literally redefine any unit (as we have done so multiple times in the past) and end up with zero coincidences.All measurement metrics are “fake” - nothing is truly universal, and can easily be correlated with another human made measure eg Pi.
 I seriously doubt you could define any system of units that has zero coincidences, even with significant computational effort. Some things in the real world are just going to happen to line up close to round numbers, or important mathematical constants, or powers or roots of mathematical constants, and then you’ll have some coincidences.There are just too many physical quantities we find significant, and too many ways to mix numbers together to make expressions that look notable.
 msteffen 30 days ago It’s really the best and only way to find non-coincidences involving the definition of units, though. All such non-coincidences will have this property
 All coincidences involving the definition of units will also have this property. Once you’ve narrowed to that specific domain, invariance to change of units is completely uninformative.
 koolala 30 days ago Reading this gave me a chill. Please take my temperature and compare it to the norm temperature of humanity.
 Changing units in Electrodynamics for instance comes with unexpected factors in formulas though, indeed containing π. (CGS <-> SI)
 Isn't that just the change between rad/s and Hz?
 setopt 30 days ago It’s more precisely the difference between “rationalized” and “unrationalized” units.You need a factor 4pi in either Gauss’ law or Coulomb’s law (because they are related by the area 4pi*r^2 of a sphere), and different unit systems picked different ones.It’s more akin to how you need a factor 2pi in either the forward or backward Fourier transform and different fields picked different conventions.
 vitus 30 days ago > It’s more akin to how you need a factor 2pi in either the forward or backward Fourier transform and different fields picked different conventions.Some fields even use the unitary transform -- they split the difference and just throw in a 1/sqrt(2pi) in both directions.https://en.wikipedia.org/wiki/Fourier_transform#Angular_freq...
 elashri 30 days ago It is more involving [1]
 It is not unusual case. The heuristic you want is working. It's nothing more than a coincidence.
 What are you disputing about the explanation given in the post? As far as I can tell, it’s basically accurate (although the pendulum unit was called the toise, and the meter seems to have targeted half a toise). If you accept that account, it’s not a coincidence.
 I initially had an objection due to a misconception I was carrying.I see now that the pendulum formula is a pure relation between time and distance/length. It will apply regardless of the units used. For example if we measure time in fortnite and length and furlongs the formula will be the same. The gravitational acceleration of course will be in those units: furlongs per fortnights squared. Needless to say that will not be 9.81.Now the meter unit was chosen in relation to the second unit by the length of a pendulum that produced an integer period. So that choice/relation caused the gravitational acceleration g to take on such a value that its square root cancels out the π on the outside of the root.I was confused for a moment thinking that the definition of the kilogram would somehow be mixed up in this but of course it isn't. g doesn't incorporate mass; and of course pendulum swings are dependent only on length and not mass.There are all sorts of situations in which certain units either give us a nice constant inside the formula or eliminate it is entirely.For instance Ohm's law, V = IR. It's no coincidence that the constant there is 1. If we change resistance to some other unit without changing how we measure voltage and current we get V = cIR.
 I think you are right and i had the exact same thought. I think people are misunderstanding you.
 glitchc 30 days ago Your quibble seems nitpicky and unwarranted. What the author is saying is that the relationship becomes evident if we consider the units of m/s^2 for gravity. They just didn't quite say it like that.
 Obviously it’s nitpicky. That’s what a quibble is. But I don’t think it’s unwarranted. How you reason your way to a conclusion is at least as important a lesson as the conclusion itself. And in this case, the part I quoted is a bad lesson.
 No, like objectively, a dimensionless number lining up with a meaningful constant is more likely to be because of some underlying mathematical connection, and a dimensioned number lining up is more likely to be a coincidence. There are only a handful of ways for a unit’s heritage to have a connection to a local physical phenomenon like the post describes, and that’s what it takes to have a unit-dependent non-coincidence. That’s not dependent on your perspective.The thing that’s interesting in this case is that the meter’s connection to g is obscured by history, whereas most of the time a unit’s heritage is well known. Nobody is going to be surprised by constants coming out of amps, ohms, and volts, for example, because we know that those units are defined to have a clean relationship.
 you can rule that heuristic out immediately because pi is unitless, surely?
 gklitz 30 days ago What? The entire point is that it’s no coincidence in this unit set. Saying that changing units indicates a coincidence is like saying that if we see Trump suddenly driving a Tesla after Elon stated throwing money at him, that must be just a coincidence because if we change the car model to a ford then there would be nothing odd about it.
 That analogy is so bizarre that I have no idea how to respond to it.
 koolala 30 days ago Truth feels like a coincidence when 1 small thing can make anything wrong.
 As a physicist, this makes sense. Pi = 3, pi^2 = 10, which is gNot sure why everyone is surprised.Ah, and a year is pi*10e9 seconds (IIRC)
 As a computer scientist this is not surprising either. After all there are only three numbers: 0 1 and n.
 jeffwass 31 days ago One of my old physics professors said something similar - there are only three numbers in the world - 0, 1, and infinity. No wait, zero is just one divided by infinity, so there are only two numbers, zero and one. So if the answer is not zero, it must be one. (ie, how to justify dimensional analysis and ignore any dimensionaless constant).Hysterical, especially for the fact that he quotes 'two' and 'three' in the sentence itself.
 klabb3 30 days ago Another one would be philosophy: there’s nothing, something and everything. Or logic: ∃, ¬∃ and ∀. Just rambling here, but seems like universal concepts across fields.
 john-aj 30 days ago Chiming in from theoretical linguistics: it is impossible for natural languages to "count", i.e. make reference to numbers other than 0, 1 or infinity.As an example, there are languages where prenominal genitives are impossible (0).Then, there are languages, such as German, where only one prenominal genitive is possible (1):> Annas Haus> *Annas Hunds HausFinally, there are languages, such as English, where an infinite number of prenominal genitives are possible (infinity).> Anna's house> Anna's dog's house> Anna's mother's dog's house> Anna's mother's sister's ... dog's houseBut there are no languages where only two or three prenominal genitives are possible.This property is taken to be part of Universal Grammar, i.e. the genetic/biological/mental system that makes human language possible.
 nomonnai 30 days ago As a German speaker, the claim "more than one prenominal genitive is impossible" seems interesting but perhaps not entirely accurate. As a non-linguist I probably misunderstand the meaning of prenominal genitive and might be missing your argument's point. For the overarching discussion we should note though the great variety of refering to "more than one element" in German.> Anna's mother's sister's dog's house> Das Haus des Hundes der Schwester der Mutter von Anna.It's difficult to parse though. We only get to know about Anna at the end of the sentence. Consequently, we avoid such sentences or use workarounds.> Von Annas Mutters Schwester dem Hund sein Haus.If you ever use such a construction German speakers will correct your bad language but they will perfectly understand the sentence's meaning.A quick search brought me to this presentation: https://www.linguistik.hu-berlin.de/de/staff/amyp/downloads/...The take-away seems to be: "German does not work like English" (slide 8) so be careful when comparing PreGen in German and English.
 imoverclocked 30 days ago He already got rid of "three" and just needed a little help to get rid of "two." Since we already have 0 and (almost) everything else can just be "one more" than something else, we only need 0 and one more ... or 1.One and Done!
 tymscar 30 days ago Very much like lambda calculus
 pansa2 31 days ago Remember that `i` is also a number. As in `for i = 0 to n`.Don’t believe those mathematicians when they tell you that `i` is “imaginary”.
 All numbers are imaginary.sqrt(-1) should have been called w, for "weird".
 syockit 30 days ago I use w for the complex roots of 1 though, when rewriting FFT notes.
 360MustangScope 31 days ago You mean the legendary “i”. There is no n.
 ithkuil 30 days ago And -0 and NaN
 HPsquared 31 days ago And int_max
 Maken 30 days ago That's a implementation detail.
 de_nied 31 days ago Yea if you're some classical snob.- Posted by the quantum gang
 radiator 31 days ago As a physicist? When we did physics at school, and we were solving problems, the answer was always a number together with its unit. pi² might be 10 because it is a pure number, but g can never be 10, because it is an acceleration, a physical quantity, so it must be 10 of some unit.
 Oh, come on, it is inches / (day * "hold on"). Everyone knows this, this is physics for art majors 101.In guess it's a good thing I left physics after my PhD.
 jrpt 29 days ago I mean it is pretty common to set c=1 though.
 bmacho 31 days ago Not if you define g as the real number before m/s^2, in the expression '10 m/s^2'.In middle school physics lessons this makes teachers to hate you (it's their job to ensure that you do not do this), but after that, this has advantages time to time... I remember hearing an anecdote that ancient Greeks did not know that numbers can be dimensionless, and when they tried to solve cubic equations, they always made sure that they add and substract cubic things. E.g. they didn't do x^3 - x, but only things like x^3 - 2*3*x. I don't think this is true (especially since terms can be padded with a bunch of 1s), but maybe it has some truth in it. It is plausible that they thought about numbers different ways than we do now, and they had different soft rules that what they can do with them.
 I assumed the pi / g connection was because cows that accelerate in a vacuum are spherical.
 Sharlin 30 days ago According to the Banach–Tarski paradox, if you accept the Axiom of Choice, you can disassemble a spherical cow and put the parts back together such that you end up with two cows of the original size. How exactly this affects Cow Economics is not well-understood.
 openrisk 30 days ago I think it was Gauss who proved that any convex cow would work equally well. But we need to assume an infinitesimally thin and infinitely long tail as boundary condition.
 sa46 30 days ago Pi seconds is a nano-century. So 1 year = pi*10^7 seconds
 leoff 30 days ago as a mechanical engineer, can confirm. also, e ≈ pi ≈ 3
 winwang 30 days ago in fact, e = 2, made rather abundantly clear in "finite difference" calculus, and also that in computer science, the "natural" log base 2.
 A year is pi 10^7, or pi 1e7.On the other hand, 10 e9 = 10 * 10^9.
 3600 seconds per hour, times 3*8 is only about 80,000 seconds a day. You can’t get to a billion from there.
 Sharlin 30 days ago The pi in pi*10^9 seconds clearly comes from the fact that Earth’s orbit is circular.
 maxnoe 30 days ago Nore sure if serious or not, but anyway:1) it isn't circular, although just barely (it's an ellipse) 2) the length of the day is not really related to the length of a year, and the second was defined as 1 / (24 * 60 * 60) = 1 / 86400 of the mean solar day lengthSo this is really just a coincidence, there is no mathematical or physical reason why this relationship (the year being close to an even power of 10 times pi seconds) would exist.
 Sharlin 30 days ago Definitely not serious :)But from the fact that an Earth year happens to be roughly pi*10^7 seconds long, it follows that in 10^7 seconds Earth travels about two radians, or one orbital diameter, and equivalently that the diameter of Earth's orbit is roughly 10^7 seconds times Earth's orbital speed.
 exe34 31 days ago pi * 1e7
 Another "wonderful coincidence" is that the conversion between miles and kilometers involves this constant of conversion : kilometers = miles * 1.609344. Let's call 1.609344 the "km" constant.As it happens, km is very close the the Golden Ratio (sqrt(5)+1)/2 = 1.618033989... (call this "gr"). In fact they only differ by about 1/2 of one percent (100 * (gr/km - 1) = 0.54%)! As the author of the original article says, "If you express this value in any other units, the magic immediately disappears. So, this is no coincidence ...". Yeah ... wait, what?Here's another one. Pi (3.141592654...) is nearly equal to 4 / sqrt(gr) (3.144605511...), call the latter number "ap" for "almost pi". This connects pi to the golden ratio, and they differ by only 0.096% (100 * (pi/ap - 1)). Surely this means something -- doesn't it?Finally, my favorite: 111111111^2 = 12345678987654321. This proves that ... umm ... wait ...
 Do miles connect to feet and feet vs. gravity connect to the Golden ratio? 6 feet is like 2 pi?
 kelnos 30 days ago Not sure, but I am indeed often connected to the earth via gravity by my feet.
 Me too.
 maxnoe 30 days ago A year is very close to pi * 1e7 seconds, better than half a percent.
 ln(5) ~ 1.6094379 is much closer, differing by about half of a percent of a percent.
 The best is sum(1, 36)
 If the length of a meter were defined as the length of a seconds pendulum [1], then g would equal exactly π². From the pendulum equation:`T = 2π√(L/g)`substitute T = 2 s and L = 1 m:`2 s = 2π√(1 m / g)`solve for g:`g = π² m/s²`.This holds up in any strength of gravity, but the length of a meter would be different depending on it.[1]. This actually was proposed by Talleyrand in 1790. Imagine the world if this were true!
 The article explains that Huygens proposed this in the 17th C, and gives the same derivation :)
 I've got a related one I like. Why are the Avogadro's number and Boltzmann's constant inverses of each other N ~ 1/k? The statement doesn't make sense because the units don't work out, but it is true in mks. It's because they multiply to the gas constant which is ~1. They both are numbers to transfer from the microscopic to human scale units and they cancel for the gas constant, which is about human scale experience of gases.
 Funnily Avogadro's constant is actually equal to 1: it's defined as Avogadro's number times mol, but mol is itself a dimensionless quantity equal to the inverse of Avogadro's number.
 aaaronic 30 days ago Multiplying by increasingly complicated expressions equivalent to “1” is what I remember doing for almost every problem in Quantum Mechanics.
 bonzini 31 days ago But it's a coincidence, right? N*k=8.31 is pressure*volume/temperature for a mole of gas. Temperature has a relatively small range (100-1000) and there's no reason why the range of P*V couldn't be far from that range, for example 0.01–0.1, with a different definition of meter, second or kilogram.
 lupire 30 days ago Meter, second, and kilogram were all chosen to be approximately the scale of a human, and the combined multiplicative units like Pascal, m^3, and Kelvin/Celsius are also numerically 1 in these units.
 Someone 30 days ago > Meter, second, and kilogram were all chosen to be approximately the scale of a human,“Approximately the scale of a human” leaves so much wiggle room that I don’t see how one can defend that claim.> and the combined multiplicative units like PascalYou don’t explicitly claim it, but I wouldn’t say the Pascal is “Approximately the scale of a human”. Atmospheric air pressure is about 10⁵ pascal, human blood pressure about 10⁴ pascal, and humans can very roughly produce about that pressure by blowing.
 Ekaros 30 days ago Which is why I have always kinda hated kilogram. Such an ugly unit for it having prefix. Grav should have been correct answer, but instead we ended up with something that is too small... That is in reality gram. For grams we could simply have milligravs or decigravs for 100g equivalents... Not that hard considering decilitres are used and decimetres are kinda tried in schools.
 bonzini 30 days ago Pascal is pretty small and m^3 is pretty large though. That's why we still often use millibar and liter. They just happen to largely cancel out.
 stkdump 30 days ago A human is ~1 meter, 1e2 kilograms and 1e9 seconds.
 You could not have done a worse job explaining it.This is written for which audience. For a person who doesn't know physics this is a very long and confusing explanation. Explaining that some units depend on others, and the importance of the ability to reproduce the metric system on your own, is much more important than the whole pre-story of length standards.There are lots of unanswered questions. What was the second defined as? Don't you measure time using a pendulum? Why was the astronomical definition more reliable?For a person who does know physics you can write a much shorter and clearer explanation eg.:"For a universal definition of the meter you need a constant that appears in nature, such as gravity. You could measure the distance an object falls in some amount of time, but it is easier to use a pendulum.Pendulums swing consistently with a period approximately equal to 2pisqrt(string length/gravity). I you were to use pi^2 for gravity, than after the square root the pis would cancel out, leaving T = 2*sqrt(Length). This is useful because a 1 meter pendulum takes 2 seconds to swing back and forth (1 second per swing.)Clocks at that time were quite accurate, with the second being reproducible from astronomical measurements. So you could take a pendulum, fiddle with it's length until it does exactly one swing every second, and then use the string or stick to measure whatever you wanted.That was great so they changed gravitational constant so it would equal pi^2 (9.87 m/s^2). (If you decrease the meter, everything will become longer.)Then they found out that gravity differs along earth's surface and a perfect mathematical pendulum proved to be difficult to reproduce, so they switched to an astronomy based definition based on the size of earth. That turned out to be broken as well, so they held a physical meter long stick in Paris. A few years ago physicists started using the plank constant which is the smallest possible distance you can measure."
 The meter is now (as of 2019) defined as the distance light travels in vacuum during N cycles of an atomic clock[1]. Note that to take into account GR effects you'd need to specify where on Earth you do the measurement, since gravity affects the clock rate. The velocity of light is defined, not measured, now. This is actually quite profound, because our system of units is now based on the validity of special relativity.
 Awesome write up and a great surprise in the history of the definition of the meter.Reading this reminds me a little of mathematicians like Ramanujan who spent a fair amount of time just playing around with random numbers and finding connections, although in this case, I imagine the author knew the history from the beginning.Anyway, I feel like my math degree sort of killed some of that fun exploration of number relations — but I did like that kind of weird doodling / making connections as a kid. By the time I was done with the degree, I wanted to think about connections between much more abstract primitives I’d learned, but it seems to me there are still a lot of successful mathematicians that work this way — noticing some weird connection and then filling out theory as to why, which occasionally at least turns out to be really interesting.
 Relatedly, I recommend reading "The Measure of All Things" by Ken Alder about the origins of the metric system and the first scientific conference ever. It is a surprisingly gripping read.https://www.simonandschuster.com/books/The-Measure-of-All-Th...
 Totally unrelated to the content, but about the website itself.The site completely breaks when I visit it. After some investigation, I found out that if I enable Stylus (a CSS injection extension) with any rules (even my global ones), the site becomes unusable. Since it's built using the React framework, it doesn't just glitch; it completely breaks.After submitting a ticket and getting a quick response from the Stylus dev, it turns out that this website (and any site built with caseme.io) will throw an error and break if it detects any node injected into ``.
 I don't currently use Stylus, but it breaks for me too; it looks like CSS isn't applied at all: I get some big logo images, and the text uses standard fonts. Not sure which extension triggers it, probably Dark Reader. I could still read it, so no biggie.
 > Sometimes that was even useful. If you needed to buy more cloth, you'd call the tallest person in the village and have them measure the fabric with their cubits.I highly doubt this bit of strategy would have worked with sellers of said fabric. They may have not had formal measurements but they weren't stupid either.
 I find this comment delightfully ironic in a contemporary moment of blatant shrinkflation.
 This post feels like one of those cork boards with photos and strings connected between them in some prepper’s basement, but in blog post form.
 Very interesting!So if I understand correctly: the meter was defined using gravity and π as inputs (distance a pendulum travels in 1 cycle), so of course g and π would be connected.
 On the hand, g is about 32.2 ft/s². So it's suddenly related to π³? I think there's no connection at all, it's just an accident. It would be really weird if some contemporary property of the earth were actually related to a fundamental mathematical constant. It's similar to finding a message among the digits of π that shouldn't be there, statistically speaking.
 cvoss 31 days ago The bulk of the article is devoted to explaining that g = pi^2 in m/s^2 units (under an old definition of meter) because (that definition of) the meter was not selected arbitrarily, but selected in a way that makes the equation hold on purpose.
 This article reasons that it is not a coincidence because of the “seconds pendulum” definition of the meter, which would necessitate the values being equal because of the pendulum time period equation.That all makes sense to me, and I agree.But here’s what’s odd to me:We ended up not choosing the seconds pendulum approach (for reasons mentioned in the article). Instead they chose to use “1 ten-millionth of the Earth’s quadrant”. Now, how is it that that value is so close to the length of the seconds pendulum? Were they intentionally trying to get it close to seconds pendulum length, and it just happened to be a nice round power of ten? Is that a coincidence?
 I seriously need an explanation for that too. Never understood how these genius folks just came up with the most outlandish definitions that somehow make perfect sense
 He wouldn't be speaking like this if he was born on Mars.
 Sure he would, the meter would just be a different length.
 Maxatar 30 days ago I thought they key insight of this article was if he were born on Mars, then the meter would have been defined differently so that gravity would still be 9.8 m/s^2.I think what you meant to say was that he wouldn't be speaking like this if people were born with 3 fingers.
 The pendulum from the Mars pole to Paris would be long indeed!
 baxtr 31 days ago Finally an easy way to identify aliens!
 samstave 30 days ago How? Because they don't have a Venus?
 If the definition of the meter is still wrong disallowing π² = g, how might this affect other calculations like for example thrust and in aerospace engineering?
 And what would all other natural constants look like, had the meter kept the value derived from the length of the pendulum?
 I laughed 3 times reading this article while pondering the novelty of standardization.Is standardization the sans-serif of civilization?
 Another interesting coincidence (or perhaps a decades-long dad-joke troll perpetrated by German-speaking scientists) is that 1 hertz is roughly equal to the frequency at which a human heart (“Herz” in german, with a nearly indistinguishable pronunciation to “Hertz”) beats.
 That seems rather low rate. Regular rate in rest is 60 to 100. Which only lower bound is roughly 1Hz, while upper rate is quite far what I would understand German to understand as roughly.
 jobigoud 30 days ago 80+ heart rate at rest seems very high to me. Is this based on averages from present-day people? Including lots of sedentary people with hyper tension, overweight and obese people, etc. So "normal" in the statistical sense but maybe not "normal" in the physiological sense?Athletes have much lower resting rate. So if we take feral humans from 50Ky ago their rest heart rate would have been much closer to the 60 bpm.
 The pendulum equation isn't progress at all, it's just another observation of it? Driving it 'backwards' as it were with known values for the parameters it would determine, and seeing that pi squared is roughly g without having to know the actual values of those constants.And now I've finished the article, nothing more is really offered. Am I missing something? That doesn't explain it/answer the question at all afaict? All we've done is find an equation that uses both pi and g, which shows again the relationship we started from?
 The point is that the original definition of the meter was the length such that, when g is expressed in meters, pi^2 = g
 Underlying idea of whole metric and SI system is the real start point. You want to define some units that you can easily replicate. Time is reasonable enough one, measure and track length of day and then length of second. Now based on this figure out way to come up with replicable definition for distance, pendulum is good enough gravity is constant enough. Thus linking gravity and meter arises.From here you can define lot of other units like mass and Volt and Ampere... Everything comes from second which is weird, but does make lot of sense.
 If society were tasked one day with reinventing standards and units, it doesn't matter why, what do you think are some things they would change?For example, I think for human counting, base 12 is about as easy as base 10, but gives good ways to express division by 3, in addition to division by 2 or 4. It also fits better with how we count time, like how there are 60 seconds in a minute, 12 months in a year, etc... but I imagine those might be revised as well.Anyways, I'm curious to hear what others think.
 I think there's an argument for base 16 over 12. It's very slightly worse than base 12 for purely human use, since it's only divisible into halves, quarters and eighths. However, each hex digit maps to an exact number of binary digits, which I think outweighs the benefit of thirds and sixths in a digital world.Of course, it's all theoretical, because there's no chance this would ever happen short of an apocalypse that takes us back to the stone age, and unless the radiation gives us 12 or 16 fingers, we'd probably just reinvent decimal.
 To be honest I'm not a fan, time is cumbersome to do any sort of addition or subtraction to get exact days/hours/minutes (not to mention timezones etc).Compare to metric units, always base 10 and always easy to convert mm to cm to m and so on.Now that we live in a digital world - why do we consistently reinvent date/time libraries? To me that's proof enough the concepts are just hard to work with and over a long span of time verify your calculation is correct.
 None of those issues with date and time are anything to do with the base, they're to do with date and time as defined by humans being inherently complicated concepts. Specifically, trying to have a single measurement "fit" for a load of different purposes.If we had based our system around base 12, a base 12 version of the metric system would be just as easy to work with as metric is in decimal, with the added bonus that you can divide powers of the base (10, 100, 1000, etc.) into quarters, thirds and sixths without needing a decimal place, and thirds of 1 would be non-repeating.
 I remember in mechanical engineering class we would often use this for exercise sheets. On our calculator we could directly enter π and ², thus it was equally as fast to entering 10.
 That's one way of setting up a standard deviation!
 How do mathematicians handle it when there are tantalizingly close relationships between purely mathematical numbers? I fell down this particular rabbit hole through the musical entrance (just intonation intervals), but I mean look at all this, it's clearly a setup.https://en.wikipedia.org/wiki/Mathematical_coincidence
 This is neat, but still something if a coincidence.It appears the first definition of a metre is in fact around 1/4e10 the circumference of Earth, and the further coincidence is that a 1m mathematical pendulum has a period of almost exactly 2 seconds.So there's still a neat relationship between mass/radius of Earth, its diurnal rotation period and the Babylonian division of it into 86,400 seconds.
 According to the article the 1/4e10 circumference definition came second
 Wikipedia says the Earth circumference definition comes from around Copernican times.Also my reading of TFA is that the pendulum definition was in fact a redefinition that didn't catch on.
 Ekaros 30 days ago I wonder how many numbers they checked until they arrived on this one. As to me it seems picked as something close enough for committee work.
 Our mechanics professor in university told us that Pi squared is ten and 6xPi=20. He said "engineers do not care for the fourth digit after the dot. If you want some number very precisely calculated just hire a mathematician instead because they are cheaper per hour"
 Multiple people have brought this up and I just don't get it. When would you ever use Pi squared for anything, and if you'd never use it, who cares what its value is?The only thing I could come up with is marking out an area by rolling a wheel some number of times to measure each edge.Long ago, I memorized the square root of pi precisely because it seemed like the least useful number I could think of. (I was frustrated by something. Never mind.) But pi squared seems like it's pretty much the same in terms of usefulness.If you said pi is the square root of 10, then I could see the value. Maybe that is what is being implied?
 More fun arithmetic coincidences: https://en.m.wikipedia.org/wiki/Almost_integerSome of these are test vectors for math systems.
 There is nothing meaningful about this. I can change the unit system to make g any value I want (this is done all the time in research). I try really hard to ignore all the physics-related articles posted here but this one is too egregious. It's not the usual thing where the author know nothing about the nouns they are using (enter, quantum). In this case the concepts are fairly simple. The fact that units can be freely changed should be taught in middle school.Somehow I found programmers have a much higher probability of talking about physics than people in other professions. And unfortunately in all cases I've seen, they have no idea what they are talking about. Unlike programming, physics is hard enough that it needs to be studied in classes.
 This is addressed in the article, including the fact that you can change the unit system to change the value of g.The article explains that the coincidence comes from the fact that the meter, as a unit, was defined (by Huygens) based on g and π. It was later redefined several times and the link between the two values became anecdotal. In other words, on another planet the gravitational constant would still have had a value of (approximately) π², and what would have been different is our unit length.
 Yeah, I saw the author says it depends on the units. But like, why is this interesting? This is not physics, just some number coincidence in the metric unit system, and I'm sure one can find many more these kind of things by playing around with the constants. The fact the author calls this a "wonderful coincidence" is just... Like, a simple energy conservation or momentum conservation, taught in middle school, is infinitely worth being talked than this.One philosophy in physics, is that the world and its rules are independent of human. We actively try to eliminate and downplay historical and human factors in the theory, and try to talk about just "the physics", because those factors often obscure the real physics (mechanism) and complicate the calculation. I mean people can find a historical thing interesting, but I guess I just feel disappointed that people find such a trivial thing so interesting, and maybe think that this is what physics is about, while physics is about anything but those pure coincidences.
 aaplok 30 days ago > why is this interesting?Physicists need some precise definitions of units, and this is hard. Harder than most people expect. You can't do physics properly using your current king's foot size. This, more than the actual computations, was Huygens' valuable insight.So you need a universal constant to serve as a standard, and it turns out very few things are in our world. One of them is the ratio of the perimeter of a circle over its diameter. So it's no wonder that this ratio comes up under various forms in our standard units, more often than chance would predict.This is interesting because students of physics need to understand the complexity and importance of coming up with a standard set of measurement units, based on universal constants.This is also interesting because the reason we need standard units is that we need science to be reproducible. If all I care about is to understand the world on my own then using the size of my own foot will do just fine as a unit.Accessorily it's also useful to address the nonsense belief that such coincidences prove the existence of god or the perfection of nature.None of this will come as radically insightful to you, but there are a lot of people in this world for whom this is not the case.I'm also not a fan of over the top language, but this seems to be the norm of our attention-seeking times.
 Thorrez 30 days ago >This is not physics, just some number coincidence in the metric unit systemIt's not a coincidence. The meter was (historically) intentionally defined as how long a pendulum is that swings in 2 seconds. When you do that, g = pi^2.>The fact the author calls this a "wonderful coincidence"The author doesn't call it a wonderful coincidence. The author asks the question of whether it's a wonderful coincidence or not, and comes to the conclusion: no.
 umanwizard 30 days ago Consider this to be an article about physics, not history. The article can be boiled down to one sentence: “the meter was originally defined to make pi^2=g”. This was a fun fact I didn’t know.
 Too late to edit, but I meant to say “consider this to be an article about history, not physics”.
 > was actually proposed back in the 17th centuryPretty sure it was done back in Sumer first.
 https://www.ukbiblestudents.co.uk/Great%20Pyramid/chapter%20...>“It was contended," says Dr. Peacock, " by Paucton, in his Mẻtrologie, that the side of the Great Pyramid was the exact 1/500th part of a degree of the meridian, and that the founders of that mighty monument designed it as an imperishable standard of measures of length.https://www.theguardian.com/science/2020/dec/06/revealed-isa...>Newton was trying to uncover the unit of measurement used by those constructing the pyramids. He thought it was likely that the ancient Egyptians had been able to measure the Earth and that, by unlocking the cubit of the Great Pyramid, he too would be able to measure the circumference of the Earth.
 A standard free measure for distance? Sounds dubious.
 No. The other way around. Two seconds is the period of a pendulum with a length of two Sumerian cubits.(One meter is thus two Sumerian cubits, but that's an artifact due to us still using Sumerian time measurements.)P.S. I don't know why Sumerians used a factor of two. Americans still divide the day into two 12 hour spans, according to Sumerian fashion.P.P.S. One second is 1/(2*12*60*60) of a solar day. 12 and 60 were "round numbers" in Sumer; they used sexagesimal counting.
 Maken 30 days ago Probably because 12 is a much better base than 10. 12 can be divided by 2, 3, 4 and 6 and still results in whole numbers, which helps a lot when doing rounding and fraccional numbers. The only reason we use base 10 is because is much easier to count with our fingers.
 jjk166 30 days ago There's also a method of counting where you touch your thumb to the sections of your fingers on the same hand, which naturally lends itself to base 12. This can be extended by keeping track of how many times you've counted to 12 on the other hand, which lends itself to either base 60 or base 144.Interestingly, the Sumerians did not seem to employ this method, they would count 6 instances of counting to 10.
 gavindean90 30 days ago Because it traverses the distance twice would be my guess. If you show someone a pendulum going through 3 periods and asked a group of people a generic question like “how many times did it move” without clarifying what you meant I would bet maybe half the people would say 6 as long as everyone counted correctly.
 Pretty sure this is just a coincidence.. I mean pi literally appears everywhere if you look hard enough lol
 Having pi^2 = g would annoy me a bit as g is fundamentally a measured value. Depending on the required accuracy of the calculation, you can't even use the idealized value.
 We simply wouldn’t need “g” and would say that acceleration due to gravity on earth is sqrt(pi).
 g is related to the radius of the earth; the meter is related to the circumference of the earth; and pi is the relationship between the radius and the circumference.
 Aside from the fact that the post already explained what the actual historical connection is, your explanation requires some serious hand-waving about the mass of the Earth and the gravitational constant, neither of which were known when the meter was first defined.
 jjk166 30 days ago Reasonably accurate values for both M_earth and G were known at the time the SI meter was defined.Also it's not too hard to extend this. M_earth is a function of Earth's radius which goes into the definition of the meter. G is a function of earth's orbital period, which goes into the definition of the second. Further our definition of mass is based on the density of water, which is chosen because it is a stable liquid at this particular orbital distance from a star of our sun's mass.
 As far as I can tell, the most recent experiment to measure the mass of the Earth by 1790, when they decided on the definition of the meter, was the 1772 Schiehallion experiment, which gave a value 20% below the actual value. So if pi^2 were to somehow fall out of that it would likely be so far off as to be unrecognizable.But even that doesn’t matter, because the mass of the Earth didn’t play a direct role in the definition of the meter. If you take out the whole thing about the meter’s definition targeting half a toise, then all you have is “related to the circumference of the Earth”, and it would be a monumental coincidence if the mass of the earth and gravitational constant just conspired to somehow drop an unadulterated pi^2 out of the math.
 jjk166 30 days ago Well first of all it is an adulterated pi^2 so the odds of getting something close are substantially higher.Second, we'd be having exactly the same conversation if it happened to be g = 2pi^2, or 4pi^2, or any other reasonably artificial number.Third, if you do the math, the mass of the earth and gravitational constant do conspire.g = G * M_earth / R_earth^2M_earth is approximately (4/3) * pi * R_earth^3 * Density_earthG is approximately (2/3) * 10^-10 m^3.kg^-1.s^-2We can eliminate our human units and rewrite it asG = 2/3 * 10^8 / ( Density_water * Earth_orbital_period^2)Put this all together and you getg = 8/9 * pi * 10^8 * (Density_earth / Density_water) * ( R_earth / Earth_orbital_period^2 )the ratio of the densities of earth and water is a dimensionless number that is independent of our units of measurement, and is approximately 5.5. With a little rearrangement we getg = 88/9 * (pi/2) * 10^8 * R_earth / Earth_orbital_period^2That 88/9 happens to be equal to pi^2 to within 1% error. This comes purely from nature.1 m/s^2 is defined to be (pi/2) * 10^8 * R_earth / Earth_orbital_period^2 and thus we get the nice and neat g = pi^2 in metric units, but getting (pi^3)/2 * 10^8 in natural units is just as remarkable.
 Regarding "Catholic meter": its definition depends on time measurement. How did they ensure that "seconds" of different clocks were equal?
 The traditional definition of the second before modern timekeeping was 1/86400 of a day. I’m guessing that was precise enough for their purposes.
 jobigoud 30 days ago It must have been brutal to create the first clocks when your smallest external reference is a day long. You first make a huge hour glass or clepsydra and tweak it once per day until it's perfect. Very slow debugging loop.
 tdiff 26 days ago Well, defining seconds via "caesium frequency" is perhaps more brutal.
 What an amazing post! Such an interesting investigation. These kinds of write-ups make me realize how truly far we are from AGI. Sure, it can write amazing code, poems, songs, but can it draw interesting conclusions from first principles? I asked both ChatGPT and Claude, the same question, and both failed at pointing out the connection the author states.This is not to deride feats of AI today, and I am sure it will transform the world. But until it can show signs of human ingenuity in making unexpected and far-off connections like these, I won't be convinced we are nearing AGI.
 > Sure, it can write amazing code, poems, songs, but can it draw interesting conclusions from first principles?Can you?https://youtu.be/KfAHbm7G2R0?si=oAPrNGylo7pUcRMZ
 air7 31 days ago Arguably most humans can't do this either.
 Can we do the same with 432Hz please432: yes it's a super fun and interesting number 432 cycles per second: seconds are not in fact special
 Would readers well-versed in physics be happier if the equation in the title were `g ≈ π² m/s²` instead of `π² ≈ g`?
 I knew that historically meter was related to the size of the earth somehow, but I had never had about the pendulum definition!
 Philosophy time:Does this mean in 400 years it's possible we no longer disagree about how to evaluate things? i.e. we converge on one totalitarian utility function that everyone basically accept answers every possible trolley dilemma?In 1600, people just took the world as that: measurements are sloppy, and vary culturally and based upon location etc. But we eventually came upon tools and techniques that are broadly accepted as repeatable and standard.Would this sort of shift be possible? Or desirable?
 Personal preferences continue to exist. I don't see that happening.
 Might be interesting if were true in Planck units.But also 2Pi is fundamental, who defines a ratio of something to 2 of something (radius)?
 No, Tau is fundamental. Pi only exists because someone mistakenly thought the formula for circumference involved diameter, when in fact it involves radius. ("Quit factoring a 2 out of Tau!" I tell them.)
 Eh, you can find plenty of cases where tau is just as awkward as pi is elsewhere. Right off the bat, the area of a circle becomes more awkward with tau, becoming (tau*r^2)/2, and in general, the volume of an n-ball gains weird powers and roots of two in its denominator as n increases if you switch to tau. In general, I don't think you can really claim either one is "more fundamental". It's just a matter of framing.
 Actually, no: that Tau-centric area formula you gave derives naturally from taking the integral. Your example actually fits the expectation you have from what you learned in Calculus I. You should _expect_ that 1/2 scaling to be there.If it seems awkward to you, it's only because of a lifetime of seeing it done in terms of pi.
 You can argue that having an extra number to juggle around is somehow less awkward because, under specific and subjective criteria, it’s “expected”, but given that the whole hook for tau is “we keep having to put a multiplier of two everywhere”, I don’t find it very compelling.I can also make arguments that pi/2 would have been a better constant from a teaching perspective. The pi/2 version of the Euler identity, for example, would give you all the tools you need to link complex multiplication to rotation.But at the end of the day, the choice of multiple used for the constant is a convention. None is going to be ideal in every case, and no math fundamentally changes because of a particular choice. Trying to argue for a change in convention at this point is just silly.
 amelius 29 days ago In case you didn't see this:https://tauday.com/tau-manifestoAnd this is the section that addresses your point:https://tauday.com/tau-manifesto#sec-circular_area
 The entire tau manifesto is basically an exercise in how you can come up with rationalizations for just about any aesthetic preference, and the “area of a circle section” is a perfect example of how far you can go with the gymnastics.
 amelius 29 days ago I think that section shows that they tried to highlight arguments from both sides.
 karmakaze 30 days ago It's not really about being awkward (that's a tell not the motivation), it's about basing on a radius or diameter: which is more fundamental? Or the arc length of a unit circle or half a circle, which isn't an arbitray formula it's the definition.
 amelius 29 days ago Any examples of textbooks or papers where the author used tau instead of pi (and the topic was not tau or pi)?
 There might be, I don't know. But as you're already aware, we are culturally stuck with pi and so that's how it is taught.
 karmakaze 29 days ago That was (obliviously?) my point.
 Another wonderful coincidence:- Speed of light: 299,792,458 m/s- Great Pyramid of Giza: 29.9792458°N
 Link is broken for me?"[ErrorBoundary]: There was an error: {}"
 Try refreshing the page
 g is the distance an earth skimming satellite falls to earth in one second along the tangent. But I don't know how it is related to pi.
 Hence the 2√l formula for the pendulum haha
 Why is this comment section, specifically, such an embarrassing dumpster fire?It's a serious question; this is the sort of neat derivation that makes for a popular Youtube video, and despite Youtube comments being famously... variable in quality, the comment section on videos about things like this is vastly more literate than the threads here right now.Is it just a coincidence, the chaotic behavior of uninformed sneer comments (which exist on every post; I've certainly been guilty, to my shame) meaning that some post is going to end up being the one with no other type of comment? Or is there some surprising reason why?
 I wonder if this is how astrology was born. You can draw arbitrary connections between things if you stare at them long enough.
 > And yet, no matter how you look at it, this can’t just be a simple coincidence.why not?
 Okay so this one has an explanation. But what about these ?https://en.wikipedia.org/wiki/Mathematical_coincidenceSee also this blog: https://martouf.ch/tag/coudee-royale-egyptienne/One french royal cubit ≈ one egyptian cubit ≈ about π/6 meters. One royal span ≈ 1/5 meter = 20cm.I'm wondering whether some of these coincidences could be explained by the anthropic principle, which deals with these quasi-equalities, for instance:>An excited state of the 12C nucleus exists a little (0.3193 MeV) above the energy level of 8Be + 4He. This is necessary because the ground state of 12C is 7.3367 MeV below the energy of 8Be + 4He; a 8Be nucleus and a 4He nucleus cannot reasonably fuse directly into a ground-state 12C nucleus. However, 8Be and 4He use the kinetic energy of their collision to fuse into the excited 12C (kinetic energy supplies the additional 0.3193 MeV necessary to reach the excited state), which can then transition to its stable ground state. According to one calculation, the energy level of this excited state must be between about 7.3 MeV and 7.9 MeV to produce sufficient carbon for life to exist, and must be further "fine-tuned" to between 7.596 MeV and 7.716 MeV in order to produce the abundant level of 12C observed in nature.The idea goes like this:1. A more fundamental aspect under the anthropic principle which underpins the existence of complex life and intelligent observers is the quasi-alignment of values such as the fundamental constants in physics within a short margin.2. If you consider the universe to be the product of a random sampling process over these constants (either real or virtual, it occurred many times or just once), and given the fact we exist, which implies an abundance of coincidences, the maths seem to tell us that we should expect to observe superfluous coincidences that are non-functional for the appearance of complex life, rather than the strictly minimal set of functional coincidences necessary for its emergence.3. This implies that coincidences and pattern seeking are not just features (or bugs) of our complex minds but are present in the universe latently since it is not just fine-tuned for the emergence of complex life but for the presence of coincidences such as these https://medium.com/@sahil50/a-large-numbers-coincidence-299c....4. It may be even testable by running computer experiments relying on genetic programming/symbolic regression to see whether there is something special about the value of physical constants in our universe when compared to the value they would have in other universes. I think such experiments should factor the fact that not all equations with the same mathematical complexity (number of operands and operators) have the same cognitive complexity. Indeed, if you look at the big equation in the link above, you'll remark that it can be further compressed into a/b = c/d (where a is the photon redshift radius for instance). So I guess you'd also have to throw into the mix Kolmogorov algorithmic complexity to assess this aspect (which is in fact used in some cognitive theories of relevance to tackle this kind of stuff to the tune of "simpler to describe than to generate")Thoughts ?
 Bullshit! One is a number, the other is an acceleration. Who cares that numeric values are similar for a given set of measurement units?
 > this can’t just be a simple coincidence.uhhhhhh yes it can?
 [flagged]
 I disagree… the article talks about defining the meter using the pendulum and the second. Other planets would have their own definition of second, but not their own definition of pendulum. Since one meter is prescribed though a pendulum because of the oscillation formula and dependent on the frequency alone (in this case, 2 seconds), no matter what planet you are on, how strong gravity, is or how long a second is, the pendulum describes a relationship between seconds and meters such that if using this method a planet’s scientists would always define their units such that acceleration of gravity was eerily equal to pi^2.Makes me think of possible lunar scientists unwittingly making their meter 5/6th shorter(edit: english is hard) and then marveling at the same coincidence…
 Your comment is much more rage-bait than the article.Universal isn't a way we describe numbers. You meant to say dimensionless. Pi is dimensionless constant because it describes a relationship between two measurements of a dimensionless unit circle.Pi is expressed as a pure ratio between two other dependent numbers. Dimensionless values are special because they don't rely on any particular measurement in any particular location, lending to your misconception of "universal" constant.This article explains how a particular dimensionful constant (g, the strength of gravity on earth's surface) is related to pi.They are related because the dimensions in question are both derived from dependent properties of our planet. These dependent properties will be found on any other sphere floating in space if they are derived in the same fashion.It's good to thoroughly or even marginally understand a topic before adopting a dismissive and authoritative argument against it.
 minitech 30 days ago > Universal isn't a way we describe numbers. You meant to say dimensionless.They probably really meant to say “universal”, since dimensionless values are a less interesting category that includes… well, every number. Pi shows up in math without having to parameterize anything, making it universal in a way that even physical constants of our universe aren’t.
 On any planet where you want to define a system of units, you can start by defining a fixed time period (maybe use a fraction of the planetary rotation cycle or something), then make a pendulum that swings with that frequency, and derive a unit of distance from its length.The local value of g will be roughly pi squared pendulum lengths per tick squared, in that system of measurement.
 If you read the article you would see that it’s not a coincidence because the meter was defined such that pi^2 = g at the surface of the earth.
 mjfisher 31 days ago Nope, it's not a coincidence - it's an interesting exploration of the history of the definition of a metre. Read the article.As it says, at some point there was an attempt to standardise the length of a metre in terms of a pendulum's length; which related it directly to g through Pi.
 Numerologists unite!
 No mention of ‘meter’ being the unit of measurement, make this like saying 3:14pm is related to pi.There’s no correlation between a continuous number and a unit of measure. That’s truly apples to oranges comparison.g can easily be expressed in ‘feet’ as ~32.1 ft/s^2
 What do you mean by “no mention”? The entire article is about why this is specifically due to how the meter was first defined.
 It isn't equal to g even in SI units except at some very few spots on the surface of the earth.Change the units to any other system and it's not even roughly true.Edit: Now that i have read the article i see that it is no coincidence at all that it is close the pi squared. very interesting.
 Sorry to ruin the party, but g is a quite random number, on other planets the corresponding acceleration is different. So π^2~g is a pure coincidence and not relevant. The Newtonian gravitational constant G is a real constant btw.
 Have you read the article? The point is that the definition of the metre, which is used in g, originates from the length of a pendulum that swings once per second in the gravity field around Paris. So it is a matter of definitions, and the length of the metre originates from the duration of the second and the Earth's gravity field. The definitions of 1/40.000 of the Earth's circumference or ~1/300.000.000 of a light second came later.
 My intuitive assumption, then, is that on Mars they would have come up with a different meter such that π² ≈ 10 "mars meters" / s².Or alternatively stated, that the Mars meter would be much shorter than Earth's meter if they used the same approach to defining it (pendulums and seconds).
 A Martian meter defined by martians should relate their average size, the number of fingers they have on their hands and some basic measure of the planet.I mean, one meter is defined as 1/10^7 of the distance between the equator and the poles which leads to a round number in base 10.A unit system is not just something that matches objective reality but something that has some cognitive ergonomy.
 > A unit system is not just something that matches objective reality but something that has some cognitive ergonomy.Beautifully stated!And that's one reason why I like the US units of measurement better than SI. I mean, the divide-by-ten thing is nice and all. But _within a project_ how often are you converting between units of the same measurement (e.g, meters to centimeters)? You pick the right "size" unit for your work and then tend to stay there. So you don't get much benefit from the easy conversion in practice.But if you're doing real hands-on work, you often need to divide by 2, 3, 4, and so on. So, for example, having a foot easily divisible by those numbers works well. And even the silly fractional stuff make sense when you're subdividing while working and measuring.Of course it all finally breaks down when you get to super high precision (and that's probably why machinists go back to thousands of an inch and no longer fractions).I think there's a little bit of academic snobbery with the SI units (though, it is a good idea for cross-country collaboration), but for everyday hand-on work the US system works really well. I always love the meme: There are two kinds of countries in the world, those who use the metric system and those who've gone to the moon.I'm an AMO physicist by training and my choice of units are the "Atomic Units" where hbar, mass of the electron, charge of the electron, and permittivity are all 1. That makes writing many of the formulae really simple. Which is what you say: it has cognitive ergonomy (and makes all of the floating point calculations around the same magnitude). Then when we're all done we convert back to SI for reporting.
 bialpio 30 days ago One example where picking units within a project is still not saving you from cognitive load is e.g. when doing woodworking. Ymmv, but I can add decimals way faster than I can add 7 9/16" + 13 23/32" (numbers picked arbitrarily but close to a precision of 1mm so if you are ok w/ that precision, you don't even need fractions in SI).
 jds-67 30 days ago I have to admit I only read half of the article. Even if there is some historical fact there (but it was not mentioned at the beginning of the article), from a physical standpoint this comparison is already dimensionally wrong and also coincidentally only correct if you choose appropriate units. That was the point I was trying to make. There is not anything "deep" here.
 kbelder 30 days ago How strange."I only ran the first half of the program, but it didn't seem to give the correct answer, so it's obviously broken.""I only read the first half of the proof, but the answer wasn't contained there, so I'm forced to conclude the proof is worthless."You simply gave up before encountering the mathematical reason the relationship exists, why the units are different, and so on. You just ran with your incorrect initial assumption.
 gpvos 30 days ago Not strange at all, most people do that most of the time.
 gpvos 30 days ago I admit I scanned the article first and wondered what it was all about. The actual argument is not very clearly presented.
 shermantanktop 30 days ago I’d suggest fully reading the article.
 sidpatil 31 days ago It's not about the values, but the units of measurement. g is in units of meter/second^2. The article discusses the dependency of the meter's original definition on the value of pi.
 You are correct but the point is the way the meter is calculated, g in meters per second should come to pi squared.

Search: