> It also means TSMC’s 3 nm process isn’t ready, probably not shipping until late 2022. Apple, by virtue of their tight partnership with TSMC has known about and taken precautions against the 3 nm schedule, hence the initially undisclosed M1 Max UltraFusion design wrinkle, likely an early 2021 decision.
I find it hard to believe that this was a last-minute decision. Rather, I think this pattern of a new core design (using a new process if there is one) releases first for the smallest devices (iPhones), and the gradually moves its way up the lineup all the way up the Ultra before the cycle repeats with a new generation is likely Apple's new strategy going forwards.
My understanding is that this is pretty much what Intel and AMD do too (releasing their smaller dies on new processes first) and that this is a general strategy for dealing with poorer yield number on new process nodes. The idea that Apple would ever have considered releasing their biggest chip as the first chip on a new node seems far-fetched to me.
It absolutely was not. The A15/"M2" architecture isn't even going to be on 3nm, it will be N5P, so only a "plus" of the current node. There was absolutely no scenario where Apple was on 3nm this year.
Incidentally this means that Apple will no longer have a node advantage once Zen4 launches - both Zen4 and A15 will be on the same node, so we can make direct comparisons without people insisting that Apple's performance is solely due to node advantage/etc.
But yeah, that does go to show that 3nm is slow to launch in general - Apple would not willingly give up their node lead like this if there were anything ready for an upgrade. I don't think it's actually falling behind in the sense that it was delayed, but it seems even TSMC is feeling the heat and slowing down their node cadence a bit.
Also, as far as this:
> Second, the recourse to two M1 Max chips fused into a M1 Ultra means TSMC’s 5 nm process has reached its upper limit.
There is still Mac Pro to come, and presumably Apple would want an actual Pro product to offer something over the Studio besides expansion.
marcan42 thinks it's not likely that quad-die Mac Pros are coming based on the internal architecture (there's only IRQ facilities for connecting 2 dies) but that still doesn't rule out the possibility of a larger die that is then connected in pairs.
Also bigger/better 5nm stuff will almost certainly be coming with A15 on N5P later this year, so this isn't even "the best TSMC 5nm has to offer" in that light either.
I said quad-Jade Mac anythings aren't coming because that die is only designed to go in pairs (that's the M1 Max die). Everyone keeps rambling on about that idea because that Bloomberg reporter said it was coming and got it wrong. It won't happen.
Apple certainly can and probably will do quad dies at some point, it'll just be with a new die. The IRQ controller in Jade is only synthesized for two dies, but the architecture scales up to 8 with existing drivers (in our Linux driver too). I fully expect them to be planning a crazier design to use for Mac Pros.
What would be interesting in the far future is if, say, Zen 4 (or 5+) and M2(+) claims some of Intel's new foundry capacity...the comparisons would be very interesting...
Incidentally, there's a rumor that the iPhone 14 is going to use a new A16 processor in the iPhone Pro, but stick to last year's A15 for the non-pro version.
That's a big change from Apple where they've historically put their newest processor in every single phone they launch (even the $430 iPhone SE announced last week has the A15 now).
I wonder if it's purely a cost cutting measure, or if they're not expecting good enough yields to supply them for every iPhone, or if they're holding some fab capacity back to have room for the higher end chips alongside the A16.
I'd guess that they are having product differentiation issues between the iphone and the iphone Pro. Most people just don't see the value in faster screen, stainless band, and a not-so-great telephoto camera (I own a pro, but I'm hardly their primary market). An entire processor generation difference would give a big selling point to average consumers for paying the extra few hundred dollars.
There's been rumors that they'll be skipping A15 cores for the upcoming M2 processors.
If they skipped over the best-selling iphone, that would give them a TON of extra space for M2 chips. This would allow them to put a little more ground between the new Air with the M1 and the pro iPads. It would also allow them to drop a new version of the macbook air and drive a lot of sales there. I know I'd gladly upgrade to a M2 model -- especially with a decent CPU bump and a 24/32GB RAM option.
Then again, they could just stick with what people expect. I wouldn't be surprised either way.
I feel like I can see increased efforts at differentiation on the 13 Pro compared to the 12 Pro.
The iPhone 12 Pro was perhaps the least differentiated high-end model Apple has ever put out.
I think the 13 Pro has a few features that make it a bit more of a compelling buy:
- The new telephoto lens is a massive improvement (I wonder if your last experience was with the 12 or older? The new camera is actually worth something while the old one had mediocre quality compared to the main lens).
- ProMotion has no tangible benefit, but it makes every interaction with the screen look smoother. When you go back to old phones that don't have it, it's jarring. I can see why some of the Android-using tech enthusiasts have criticized Apple for not delivering high refresh rate for so long.
- The previous iPhone 12 had identical main/wide cameras with the Pro model unless you got the Max variant, which is no longer the case. The iPhone 13 Pro has different/better cameras all around over the 13.
- The GPU of the 13 Pro has an extra core over the 13, which was not the case for the iPhone 12 lineup. Anyone who does mobile gaming on graphically intense games should probably choose the Pro model over the regular one.
- Significantly better battery life over the non-Pro version, which was not the case for the 12 models, which had identical ratings.
For an average consumer, are those things worth hundreds of dollars?
I know the value, but I work in tech and spend tons of time digging into hardware as a hobby. Camera matters to some, but most of the rest are pretty bare features compared to the $200 (20%) increase in price.
When I list all the things I can buy with $200, where do these features rank in comparison to those other things? I'm blessed with a good job, so I can afford the luxury. I was poor when I was younger and I definitely wouldn't be spending that for those features. $220 out the door would be almost 20 hours of work at $15/hr (after taxes).
I think that's a valid question. Objectively, no, those features are not necessarily worth the literal dollar value the price segmentation is commanding.
But, there are some other points to consider:
- It seems like most people in the USA who buy mid to high-end phones finance their phones from carriers, and pay 0% interest for it. So, what the consumer is really considering is "is the Pro model worth $5-8/month more to me?" or "Would I pay $200 extra over 2-3 years?" and I think that's an easier justification for many people.
- Carriers offer a number of financial incentives and discounts in exchange for loyalty (there aren't any contracts anymore, but there are "bill credits" that function the same way).
- You did use $15/hour as an example, which around the median US salary, but Pro models are not intended to be the top selling model for the median earner in the US. They're marketed at, I would guess, the top 20% of earners, which lines up with the Pro/Pro Max models only making up 20% of iPhone sales in 2020 [1]. That would mean that Apple would expect individuals buying the iPhone Pro models to make about $75,000/year or greater. About 10% of the population makes a 6-figure salary. [2]
- Smartphones are the primary communication and computing device for many if not most people. I think that there are many people who see the smartphone as the most valuable possession they own.
> So, what the consumer is really considering is "is the Pro model worth $5-8/month more to me?" or "Would I pay $200 extra over 2-3 years?" and I think that's an easier justification for many people.
I find this attitude bizarre. It's not any cheaper! I guess it can make a difference if you have cash flow issues. But an iPhone Pro is decidedly a luxury, so if you have cash flow issues then you probably just shouldn't buy one?
Your point about cash flow is absolutely why this happens. I think that a lot of people operate on monthly budgets, not total cost.
It's not really about the total price paid, it's about whether the item is affordable on a monthly basis.
I agree with your philosophy where a lot of people are way too willing to let easy financing change their budget. I also assume that free financing would inflate prices (e.g.: cars and homes).
Would the iPhone and other flagship phones cost $700-1000 if financing wasn't so common? I don't think so, personally.
The other aspect of this is that, mathematically, $200 paid now is objectively worth more than $200 paid over time thanks to the time value of money. [1]
Let's say we're at a "normal" 2% rate of inflation. If I buy a $30,000 car today with 0% financing over 6 years, by the time I hit year 6 my monthly payment is representing a 12% lower value (inflation compounded yearly) than when I started.
Technically, even if you have $1000 in cash to buy your new iPhone, you "should" just finance it and invest/save/use the rest elsewhere.
>The generally long battery of the ProMax in particular (I had issue with my phone dying midday, forgetting to charge)
>iOS 15 Focus mode
>UWB wireless trackers
>The most effective ANC in any wireless headphones
>Apple watch for notifications, timers, etc
Are all very helpful and the promax is just good for pragmatic and practical reasons. I would definitely say it's a high priced item but I wouldn’t frame it as a luxury. I fundamentally see my phone as assistive technology, it can’t die on me, Apple makes their longest lasting phone their most expensive.
I'd imagine if anything it's a capacity issue now that they're producing mac chips in addition to iPhone chips. I suspect the fact the current chip is already so fast may also be a factor. Pretty much nobody using an iPhone is clamouring for a faster CPU. I have an iPhone 6s, and even the A9 in that is fast enough that my phone never feels slow.
> I have an iPhone 6s, and even the A9 in that is fast enough that my phone never feels slow.
Last year I upgraded from a 6s+ to a 12 and I can confirm this the other way around: my old phone did feel slow for a couple of key apps; turns out they are still slow on the new phone. They are just poorly written, and one is basically just a CRUD app with no excuse.
So my lesson is to likely keep this phone for a decade. It's not like I couldn't afford to upgrade but why bother?
I will echo this, I was on a 7 and it broke, so I got a regular model 12. The phone itself feels much faster, it loads quicker, the batteries last longer and the screen is much nicer to look at--but some of the apps I use are about the same for opening/loading time. I blame the apps not the phone; some are much better--Pokemon Go for example loads in just a second or two on the 12 but takes 30 or so on the 7.
I found the biggest difference to be the display. I changed from iPhone 7 Plus to iPhone 13 mini. From 7 on the display is wide color and the newer phones are all OLED with true blacks. They’re impressive.
Another big difference is 5G. I can easily get 500+ MBit/s downstream while outside.
I found that I can adapt to any display size. I used to have an iPhone 5s which I replaced with a 6s Plus and a 7 Plus. Recently I have changed my mind and I wanted a compact phone again to carry less weight and to distract me less. I thought it might deter me from watching videos all the time. I like how the small phone feels like, it’s more elegant.
Oh, and about the cameras: the one update I especially like is the night photography, I can now even take photos of the starry night sky.
Besides that: it’s just a phone, it just has an absurdly powerful CPU in it, and now it does text detection in images. Screenshots and photos have selectable text in it.
The camera is better at low light photos but I don't really care about that. Camera plays no role in my selection of phone and I wish the lenses didn't protrude (which they could address by putting more battery in!).
Yes, the battery was kinda shot but I could have replaced it.
Honestly, my guess is that the fab production issues impact everyone. I wonder if they get the same number of runs per $ as they used to pre-covid, my guess would be no. If that’s the case, that drives BoM up and Apple is hyper margin conscious.
Side question but I'm curious if anyone knows, where are we heading with this constant decrease in nm for chip manufacturing processes? When will we hit a wall and where will gains in performance come from then?
Like most curves that looked like exponentials initially, Moore's law turned out to be an s curve. We're already on the top half of that curve where gains are increasingly more difficult and increasingly spread out over time. There's still a more or less direct road map for another five or so full nodes, and we'll probably come up with some cute way to increase density in other ways.
>When will we hit a wall and where will gains in performance come from then?
nm notation used to mean the width of the smallest feature that could be made. Even today there are processes such as atomic layer deposition (ALD) that allows singular atom thick features. The difference between nodes now are in shrinking macro features, you don't necessarily make them smaller, more important is density. This is currently done with 3d transistors (finfet) and perhaps in the future going full vertical. When all other optimization have been exhausted it's likely to see multiple layers of stacked transistors simulator to what they are doing with NAND memory chips. Eventually even that will hit a wall due to thermal limitations. Beyond that people have proposed using carbonnano tube transistors. That tech is very early but has been proved to function in labs. If we ever figure out how to manufacture carbon nanotubes chips, it will be truly revolutionary; you could expect at least another 50 years of semiconductor innovation.
> If we ever figure out how to manufacture carbon nanotubes chips
That's the problem. We can't. All those technologies are in such a primordial state, if at all, that we don't even know if we will ever be able to use them efficiently 20 years from now.
Besides shrinking and increasing size chips, there is another big problem that might cause us to hit the wall. When the transistor count increases, it also increases the amount of effort. This is a big problem because chips need to be profitable.
Although if you just shrink the chips and keep the transistor count the same, then you have a more energy efficient chip. Which is especially useful for portable devices.
We have already hit the wall. Decreases have been minimal, and came with a high cost. The numbers you hear about "7 nm", "5 nm", etc.. are just false. They do not represent anything real.
The real numbers have been around 20 nm for a decade. They decreased a bit with Intel's competitors achieving better lithography than them before them. And we are in the realm of tons of little tricks that improve density and performance - nothing really dramatic but there are still improvements here and there. The tens of billions of dollars thrown at research achieved them but it is not comparable to the good old days of the '80s, '90s and the '00s
> And we are in the realm of tons of little tricks that improve density and performance - nothing really dramatic but there are still improvements here and there.
I don't think that's fair. Density is still increasing fairly substantially. Just going off of TSMC's own numbers here:
Performance (read: clock speeds; but for transistors those are one & the same) are not really increasing, though, those have pretty much plateaued. And the density achieved in practice doesn't necessarily keep up, as the density numbers tend to be for the simplest layouts.
Yes, to emphasize: "nm" marketing is just marketing. There is no dimension on a 5nm chip that is actually 5nm. It used to represent gate length and half-pitch but that stopped being true about 20 years ago and officially became nonsense about 10 years ago, it's "what size planar node do we think these features would perform like" now.
Because it's all subjective now, companies went wild with marketing, because consumers know "lower nm => better". But, say, GF 14nm is much more comparable to Intel 22nm, and GF 12nm is still solidly behind late-gen 14++, probably more comparable to TSMC 16nm. Generally Intel has been the most faithful to the "original" ratings, while TSMC has stretched it a little, and GF/IBM and Samsung have been pretty deceptive with their namings. Intel finally threw in the towel a year or so ago and moved to align their names with TSMC, "10nm ESF" is now "Intel 7" (note: no nm) and is roughly comparable with TSMC 7nm (seems like higher clocks at the top/worse efficiency at the bottom but broadly similar), and they will maintain TSMC-comparable node names going forward.
Anyway, to answer OP's question directly though, "what comes after 1nm" is angstroms. You'll see node names like *90A or whatever, even though that continues to be completely ridiculous in terms of the actual node measurements.
nm is purely a marketing term and has been for 10 years or 25 years depending on what you think it measures
future improvement is going to come from the same place it mostly comes from now: better design that unlocks better density and a revolutionary new litho process that as of yet doesn't exist
TL;DR: things get really murky after a notional 2.1nm generation. Past that we'll need a new generation of EUV sources, advancements in materials, etc, that AFAIK are still quite far from certain (but I am not an expert on this stuff by any means).
I personally think we're headed to a stall for a while where innovation will focus mostly on larger packaging/aggregation structures. Chiplets and related are definitely here to stay. DRAM is moving in package. Startups are playing around with ideas like wafer scale multiprocessors or ssds. I think clever combinations of engineering at this level will keep us with momentum for a while.
Oddly for GPUs its the other way around and has been for a while. Nvidia and AMD seem to start with the mid and big dies first before filling out the small ones later. Intel seems to be coming from small to big however so they may reverse the trend at least for themselves. But it could still be driven by yield issues where the margins are less good for smaller dies and they sell in much larger volume so things need to be working well to hit the volume of the market and still be highly profitable.
> Nvidia and AMD seem to start with the mid and big dies first before filling out the small ones later.
For GPUs, yield is less of an issue... the chips are manufactured with the expectation of a number of cores of the many thousand small (in terms of silicon area) ones being defective - overprovisioning, basically. That allows them to simply bin the sliced chips according to how many functional core units the individual chip has.
In contrast, even the Threadripper AMD CPUs have only 64 large cores which means the impact of defects is vastly bigger, and overprovisioning is not feasible.
Right, that's a different strategy again. If you're making a monolithic 64 core die and one of the cores is defective, and the next one down in your product lineup is the 48 core, that's going to make the 64 core model harder to stock (and maybe not worth aiming for at all, if your yields are bad enough that this happens often).
Meanwhile if you're making 6 x 8 core chiplets and one of those cores is defective, well that chiplet can go into a 48 core or be a midrange consumer cpu or something, and you'll just pick one of your many many other 8 core chiplets to go with the rest for the 64 core.
Ala: The 14/16 inch MacBook Pro making all full-die function models built to order. I do find it interesting that they did a 7 core GPU version of the M1 much like the A12X/A12Z binning. I wonder if getting full function M1 was ever the intent.
Probably because the beefier GPUs for the server or compute market are way more profitable for Nvidia than high-end gaming GPUS, which are also way more profitable than chips Nvidia might make for laptops or low end gaming.
It looks like Qualcomm is bailing out of Samsung's leading edge node, so competition for TSMC's leading edge node is higher than ever with Intel, Apple and Qualcomm all in the running.
>Qualcomm has decided to switch back to TSMC for the Snapdragon 8 Gen2 Mobile Platform. Samsung’s 4nm process node is plagued by a yield rate of as low as 35 percent.
This article is a little nauseating in its low key drooling over Apple but I think articulates what you’re saying somewhat. Basically build a product around the chip and move it down the product line, double capacity at regular intervals.
> This article is a little nauseating in its low key drooling over Apple
The author ran Apple Europe and then moved to the US and was an Apple VP for a long time. If anyone is allowed to have this kind of attitude then it's reasonable in Gassée.
Gassée also started Be Inc which created BeOS. Beyond being great in and of itself, BeOS was also slated to be the successor to Mac OS 9. If you're an operating system or file system nerd, you will find it very worth looking into BeOS. Gassée overplayed his hand and Apple's acquisition of Be Inc fell through.
Apple ultimately went with the NeXT / Steve Jobs combo, quite wisely, but for a long time there was a whole gang of BeOS fanboys lamenting that decision.
> Second, the recourse to two M1 Max chips fused into a M1 Ultra means TSMC’s 5 nm process has reached its upper limit. It also means TSMC’s 3 nm process isn’t ready, probably not shipping until late 2022. Apple, by virtue of their tight partnership with TSMC has known about and taken precautions against the 3 nm schedule, hence the initially undisclosed M1 Max UltraFusion design wrinkle, likely an early 2021 decision.
"recourse"... "design wrinkle"... wouldn't something like UltraFusion be an architectural goal at the outset, rather than something grafted on later? Feels pretty fundamental.
I have a vague memory that AMD has/had something similar -- the idea what their entire range would be the same basic core, fused together into larger and larger configurations. Seems like a smart move to concentrate engineering effort. But chip design not even slightly my area.
Depends on what the UltraFusion interconnect is. Ganging up chips as am unplanned stop-gap isn’t unheard of (e.g. the ATI Rage Fury Max). But it’s much harder to do when you’re talking about grafting on a cache coherent interconnect. If they’re using something off the shelf like CXL maybe it wasn’t planned from the outset.
It wasn't unplanned. The work by marcan on asahi Linux revealed support for multi die configurations baked into the M1 Max.
> While working on AIC2 we discovered an interesting feature… while macOS only uses one set of IRQ control registers, there was indeed a full second set, unused and apparently unconnected to any hardware. Poking around, we found that it was indeed a fully working second half of the interrupt controller, and that interrupts delivered from it popped up with a magic “1” in a field of the event number, which had always been “0” previously. Yes, this is the much-rumored multi-die support. The M1 Max SoC has, by all appearances, been designed to support products with two of them in a multi-die module. While no such products exist yet, we’re introducing multi-die support to our AIC2 driver ahead of time. If we get lucky and there are no critical bugs, that should mean that Linux just works on those new 2-die machines, once they are released!
It's possible that this product was intended to be based on M2, but support for multi die M1 was built in from the start as a hedge to avoid the kind of stagnation Intel has seen, where a node delay means they can't ship products.
I'm not saying that's what happened, but it's a charitable reading of the original post.
If we keep scaling up number of processors rather than clock speed, what is going to be the maximum number useful cores in a laptop or desktop? 20? 100? 1000? At some point adding more cores is going to make no difference to the user experience, but the way we are going we'll be at 1000 cores in about a decade so we better start thinking about it now.
Or to put it another way, what normal workloads will load up all the cores in the new M1 chip?
Being a software developer, compiling things is the obvious choice, except when you come to that rather serial linking phase at the end of the compile job. Already my incremental Go compiles are completely dominated by the linking phase.
There are a few easy to parallelise tasks, mostly to do with media (as it says in the article). However a lot of stuff isn't like that. Will 20 cores speed up my web browser? How about Excel?
Your average user is going to prefer double the clock rate of your processors to doubling the number of processors.
Anyway, I don't want to rain on Apple's parade with these musings - the M1 Ultra is an amazing achievement and it certainly isn't for your average user. I wish I had one in a computer of my choice running Linux!
I'm guessing you mean double the single core performance and not clock speed. Even Intel Pentium 4's from 2000 had higher clock speeds than Apple's M1 chips. The clock speed matters far less than what you can actually get done in a single clock cycle. Just looking at Apple's own products and their single core performance from Geekbench you can see they achieved around a 40% improvement in just single core performance [1]. So it's not just adding more cores. Apple has usually been the one to hold out on cores and usually has resisted adding more cores to the iPhone / iPad chips in the past and focused on better single core performance.
> Your average user is going to prefer double the clock rate of your processors to doubling the number of processors.
I disagree. The reality is that these days people are running multi-threaded workloads even if they don't know it. Running a dozen chrome tabs, Slack, Teams, Zoom, some professional tools like IDE's, Adobe creative suite, etc. adds up very quickly to a lot of processes that can use a lot of cores.
Isn't running multiple single-threaded workloads at the same time also a case for better performance with more cores? So even for basic tasks having more cores is better (although maybe not that cost-efficient)
Sort of related: Adobe creative cloud is the most bloated, CPU-inefficient system I’ve ever had the displeasure of working with as a professional editor. I get FCPX is apple’s NLE but the render times smoke premier in comparison and CC in general is just way too busy in the background.
Isnt true though - the Pentium 4 was released in 2000, but the fastest version available that year was only 1.5GHz. It wouldnt hit 3.2GHz (~M1) until 2003.
Apple's advantage is actually that it provides much higher single-thread (really, per-thread) performance than "comparable" x86 processors. A M1 Pro can match a 12900HK in perfectly-threaded high-code-density scenarios like Cinebench, with half the thread count. Real-world IPC is something like 3x (!) that of Intel right now - obviously it also clocks lower but Apple hits very hard in lower-thread-count scenarios.
If your code is bottlenecked on a single thread, or if it doesn't scale well to higher thread counts, Apple is actually great right now. The downside is that you can't get higher core counts, but that's where the Pro and Ultra SKUs come in.
(The real, real downside is that right now you can't get higher core counts on M1 without being tied to a giant GPU you may not even use. What would be really nice is an M1 Ultra-sized chip with 20C or 30C and the same iGPU size as A14 or M1, or a server chip full of e-cores like Denverton or Sierra Forest, but that's very much not Apple's wheelhouse in terms of products unfortunately.)
Of course IPC needs to be contextualized, but it's still a very important metric. And Intel's processors aren't clocked 3x higher than Apple either - that would be 9 GHz, and you can't even sustain 5 GHz all-core at 35W let alone 9 GHz which just isn't physically possible even on LN2.
That's an absolutely damning chart for x86, at iso-power the M1 Max scores 2.5x as high as a 5980HS in FP and 1.43x as high in integer workloads, despite having just over half the cores and ~0.8x the transistor budget per core. So it's a lot closer to the ~2.5-3x IPC scores than you'd think just from "but x86 clocks higher!". And these results do hold up across the broad spectrum of workloads:
Yes, Alder Lake does better (although people always insist to me that Alder still somehow "scales worse at lower power levels than AMD"? That's not what the chart shows...) but even in the best-case scenario, you have Intel basically matching (slightly underperforming) AMD while using twice the thread count. And that's a single, cherrypicked benchmark that is known for favoring raw computation and disregarding performance of the front-end, if you are concerned about the x86 front-end, this is basically a best-case scenario for it... high code compactness and extremely high threadability. And it still needs twice the threads to do it.
Like your "but x86 uses higher clock rates", you can also say "but x86 uses SMT", so maybe "performance per thread" is an unfair metric in some sense, but there is practical merit to it. If you have to use twice the threads to achieve equal performance on x86 then that's a downside, where Apple gives you high performance on tasks that don't scale to higher thread counts. And if Apple put out a processor with high P-core count and without the giant GPU, it would easily be the best hardware on the market.
I just strongly doubt that "it's all node" like everyone insists. Apple is running fewer transistors per core already, and AMD/Intel are not going to double or triple their performance-per-thread within the next generation regardless of how many transistors they might use to do it (AMD will be on N5P this year, which will be node parity with Apple A15). x86 vendors can put out a product that will be competitive in one of several areas, but they can't win all of them at once like Apple can.
And going forward - it's hard to see how x86 fixes that IPC gap. You can't scale the decoder as wide, Golden Cove already has a pretty big decoder in fact. A lot of the "tricks" have already been used. How do you triple IPC in that scenario, without blowing up transistor budgets hugely? Even if you get rid of SMT, you're not going to triple IPC. Or, how do you triple clockrate in an era when things are actually winding backwards?
Others are very, very confident this lead will disappear when AMD moves to N5P. I just don't see it imo. The gap is too big.
something came up in another discussion and it's an interesting point that the AVX-512 unit is still on-die for Golden Cove and probably makes up a significant amount of die space (10-20% is not an unreasonable estimate) so maybe that's a good chunk of the difference there I guess.
It's a bit of a chicken-and-egg problem. In general, devs don't target machines that don't exist.
But from some quick searching, excel will split out independent calculations into their own threads. So for that, the answer seems to be: it depends. If you're using 20 cores to calculate a single thing, it seems like the answer is "no". But if you're using 20 cores to calculate 20 different things, it seems like the answer is "yes".
These pro machines are squarely aimed at creative professionals doing video work and image processing. Of course there are used for a lot of other stuff too, but that's the biggest single use case by long way. The studio name for the new systems was well advised.
Derbauer pointed out that, for Intel's 12 series, that the e-cores dominate the p-cores not just in performance per watt, but also performance-per-die-area. I haven't run the numbers for the M1, but I'd be shocked if it wasn't similar.
It seems unavoidable that you can get more total performance with larger numbers of slower cores than smaller numbers of faster cores. The silicon industry has spent the entire multi-core era - the last 15 years - fighting this reality, but it finally seems to have caught up with us, so hopefully in the next few years we will start to see software actually start to adapt.
It's pretty well established that M1 E-cores are something like 50% the performance, but 1/10 the power consumption.
A55 is probably 1/8 the performance, but something like 1/100 of the power consumption and a miniscule die area. I wouldn't want to have all A55 cores on my phone though.
Performance per die area is also relative. For example, Apple clocks their chips around 3GHz. If they redesigned them so they could ramped them up to 5GHz like Intel or AMD, they would stomp those companies, but they would also use several times more power.
What is really relevant is something like the ratio of a given core's performance per area per watt to the same value for the fastest known core.
The only interesting area for ultimate low-power in general purpose computing is some kind of A55 with a massive SIMD unit going with a larabee-style approach for a system that can both do massive compute AND not have performance plummet if you need branchy code too.
Apple's e-cores are actually (relatively speaking) much better than Intel's. From memory, Apple gets about the same performance (actually higher in single-threaded, but same MT performance) out of about 2/3rds the transistor count as Intel. Note that this is invariant of node - obviously Blizzard cores are physically much smaller than Gracemont, but they are more smaller than you get out of a node shrink alone, apple is doing more with actually less transistors than Intel.
Since the Intel e-cores still have a relatively wide decoder, e-core designs may be the part where the bill comes due for x86 in terms of decoder complexity. Sure it's only 3% of a performance core, but if you cut the performance core in half then now they're 6%. And the decoder doesn't shrink that much, Gracemont has a 3-wide decoder vs 4-wide on Golden Cove, and you still have to have the same amount of instruction cache (instruction cache hit rate depends on the amount of "hot code", and programs don't get smaller just because you run them on e-cores). A lot of the x86 "tricks" to keep the cores fed don't scale down much/any.
edit:
Intel Golden Cove: 7.04mm^2 with L2, 5.55mm^2 w/o L2
Intel Gracemont: 2.2mm^2 with L2, 1.7 mm^2 w/o L2
Apple Avalanche: 2.55mm^2. (I believe these are both w/o cache)
Apple Blizzard: 0.69mm^2 (nice)
Note that N7 to N5 has roughly 1.6x logic density scaling - so a Blizzard core would be 1.24mm^2 or roughly 73% of the transistor count of Gracemont for equivalent performance! For the p-cores the number is 82%.
This is one of the reasons I feel Apple is so far ahead. It's not about raw performance, or even efficiency, it's the fact that Apple is winning on both those metrics while using 2/3rds the transistors. It's not just "apple throwing transistors at the problem", which of course they are, but just they're starting from a much better baseline such that they can afford to throw those transistors around. The higher transistor count in total is coming from the GPU, the cores themselves Apple is actually much more efficient (perf-per-transistor) than x86 competitors.
Golden Cove has 6-wide decoders (that should be using massive amounts of resources).
Of course, it doesn't help that Intel lists laptop chip turbo frequencies to use either 95w or 115w and Anandtech's laptop review of one had the 12900H hitting those numbers with sustained power draw at an eye-raising 85w. That's 2-3x the power of M1 Pro and only 20-30% more performance.
That laptop also showed that cutting power from 85w to 30w roughly halved the performance. On the plus side, this means their power scaling is doing pretty well. On the negative side of things, it means their system gets worse multithreaded performance at 30w despite having 40% more cores.
That's not the only factor at play. Many to most applications are dominated by single thread performance. JavaScript's interpreters are single threaded, for example.
Something I don't often see, but it does come up here and there. One nice thing about the M1 is the performance is consistent as it doesn't have a massive auto-scaling boost involved. An Intel or AMD chip might start off at top speed single thread, but then something else spins up on another core, and you take a MHz hit on your primary thread to keep your TDP in spec. The background task goes away, and the MHz goes back up. Lots of performance jitter in practical use.
Interconnects and IO also consume power. You can't just scale small e-core counts without also hitting power walls there too.
All that said, I'd love to see some E-core only chips come out of intel targeted at thin clients and long battery life notebooks.
> All that said, I'd love to see some E-core only chips come out of intel targeted at thin clients and long battery life notebooks.
they exist, that's called Atom. "e-core" is just a rebranding of Atom because the Atom brand is toxic with a huge segment of the tech public at this point, but Gracemont is an Atom core.
There's no Gracemont-based SKUs yet, but Tremont-based Atoms exist (they're in one of the models of NUC iirc), which is the generation before. Also, the generation before that is Goldmont/Goldmont Plus which are in numerous devices - laptops, thin clients, and NUCs.
Keep an eye on the Dell Wyse thin-client series, there are a lot of Goldmont-based units available if you can settle for a (low-priced surplus) predecessor.
I have a Dell Wyse, I'm familiar with them. Intel has generally gimped Atoms. The 5070 is tolerable, but it would be nice to have better RAM capacity.
Gracemont is such a huge departure from previous atom offerings I don't really consider them as having the same design goals. These new e-cores would be really nice for my use cases, better density and power efficiency than Ryzen.
Maybe with AMD dragging their feet on the V2000 and V3000 lines of low power offerings, I can get these sooner...
Well, chrome could certainly use more threads for all your tabs which might make it even more of a resource hog but probably also run faster.
Software Engineering will evolve too, like we have seen in game development over the last decade. While 10 years ago most game engines were hardly using let alone optimized for multicore systems, nowadays the modern engines very much benefit from more cores and I guess the modern OSes also benefit from having more threads to put processes on.
Amdahals law is sometimes brought out as a whammy (not saying that is what you do), but economically we would expect that there will be a usage for this extra compute: we did it server side by hosting SAAS and thereby adding more users than anybody could think of.
I suspect that rather than 1000 cores we might start to see more levels of cores, and hardware for more things. Already Apple has video encoding support. AI seems an obvious idea and it scales much better than most classical computing.
If I may bring up something that may be more of a wish: I wish that we could give up the idea of shared memory and we could have many more cores that communicated by shared messaging. We are already seeing this spread with webworkers - if it became cheap to create a new thread and computers weren't bottlenecked then maybe more games would use it too.
Message passing without shared memory is slow, having to copy data and maybe even serialise/deserialise it in the process. Message passing where you are just passing a pointer is fast.
Web workers are basically the worst case, you have to serialise your data to and from JSON when passing it to and from a worker. It’s not built for performance. There have been many cases where people have tried to improve performance of their apps by offloading work to a web worker but the added cost of serialisation ultimately made it slower than running on the main thread.
If I were to make a best case scenario on where multiprocessing , GPU acceleration and the neural engine I would say a iOS App development using a simulator , a container that contains your backend services and the iOS app using ML inference. Training on the M1 Ultra isn’t really worth it.
It can accelerate compilation times quite a bit at times, which could allow us to use more compile time safety checks and more compile time optimizations, indirectly making the lower core count computers faster.
>In passing, we’ll note there is Mac Studio version sporting a single M1 Max chip that happens to weigh 2 pounds less, most likely the result of a smaller power supply.
This article was published on 13 March. It's been known for 5 days (as of the time of this comment) that the difference in weight is due to the Ultra variant's using a copper heat sink, as opposed to an aluminum one. The whole article has this kind of feeling of off-the-cuff, underinformed pontification, and I don't think it's a very good one.
I kind of had a similar impression, but Jean-Louis is kind of an elder statesman in the industry from his time at Apple. I actually find it heartening that a guy in his mid-70s and long out of the industry still follows it from a technical standpoint even at this level.
Could you please stop posting unsubstantive comments? We ban accounts that do that repeatedly. You've unfortunately been doing it repeatedly, and I don't want to ban you again.
Sort of. Foundaries can normally point to some real world metric for their Nnm node name. But because they pick different metrics it's not useful for comparing between nodes/foundaries hence why people say it doesn't mean anything practical.
> A slightly orthogonal thought: because every word, every image of Apple Events is carefully vetted, one had to notice all six developers brought up to discuss the Mac Studio and Mac Ultra benefits inter work were women.
it was international women day on that day, i think it was a nice touch from apple
Pardon me but even as a person who developed a few toy applications for BeOS back in the 90s, what about it could have been described as "modern", then or now? Certainly today, 25 years after the fact, it doesn't feel like an OS written partially in C++, that had a few SMP tricks but barely any working networking, is modern. Even at the time, its modernity was in question compared to even Windows NT.
I liked the GUI. It also booted incredibly fast compared to windows at the time.
I remember the GUI being responsive and laid out in a way I wished Windows was at the time. I remember reading about the prospects for BeOS 5 menus later. They were going to have a ribbon of color follow your menu selections through drop downs. I forget the look since it’s been so long, but it was a cool idea. Would have made drill downs easier to follow. Notably, modern OSes can be pretty finicky about menu drill downs and outright user hostile. It’s pretty easy to lose an entire drill down by moving the mouse a couple pixels one or another way too far, for instance.
Mobile UI of course is amongst the most limited interfaces. We’ve gone backwards a lot in ways on mobile. It also seems mobile may be steering people away from certain careers by simply being good enough to ignore learning things like touch typing, Linux/foss, or hobbies that lead to tech careers. (Not sure how much sense this last point makes-just spreading to general trends I’ve heard or seen.)
Edit-maybe I’d say BeOS had a certain polish that seems lacking even in todays FOSS GUIs/OSes but especially back then.
> Notably, modern OSes can be pretty finicky about menu drill downs and outright user hostile. It’s pretty easy to lose an entire drill down by moving the mouse a couple pixels one or another way too far, for instance.
The Mac basically solved this problem in 1986 when Apple first introduced hierarchical menus. To make it work, the UI layer has to be able to avoid strict hit testing of the mouse cursor during menu tracking, which I would conjecture is probably difficult in some environments.
You’ve got to be kidding. The state of the art for the vast majority of desktop computer users was classic Mac OS and Windows 9x. Did you never see the BeOS demos where they yanked the plug out of the wall while doing heavy filesystem operations and booted straight back up without significant data loss? I don’t remember if NTFS existed back then, but most people wouldn’t use NT and successors until the turn of the century.
There were gaping holes in functionality, but BeOS was a revelation at the time.
NTFS came out years before BeFS and had journaling from day 1. At the time that people were experimenting with BeOS there were already millions of users of Windows NT. Even Windows NT 3.1 for workstations sold hundreds of thousands of copies.
Be's all time cumulative net revenues were less than $5 million.
At the time there was an idea that normal PCs could never afford to run "professional" OSes like NT, Unix, or NeXTSTEP and thus BeOS was only competing with "PC" OSes like classic MacOS, Windows 95, or OS/2. In retrospect this was wrong, although it did take until 2001-2003 for real OSes to make their way to the mainstream.
Exactly, around 98 I ran Windows NT 4.0 at work, in a very expensive Pentium II with plenty of memory (I guess 64MB at the time). At home in my personal machine with an older AMD K-5 and only 16MB (another guess) Windows NT was not very usable, although it was way more stable than windows 95.
And nevermind the price difference.
Considering how everyone called everyone a Nazi over past 5 years, I think it's to safe to say that the Godwin's Law belongs to an era of internet that has expired.
Am I the only one bothered that the M1 "Max" was apparently not the best Apple could do? In what would is the "Ultra" version of something better than the "Max" version? MAXIMUM MEANS AS GREAT AS POSSIBLE!!!
I think Full HD was really just to separate from 720p. So if you consider "HD" to mean 1080p and UltraHD to mean 4k, its like saying a "Full v6" and a "v8" or something. For whatever reason it made just enough sense to never bothered me too much.
Among the issues that Cerebras had to overcome was how to connect tiles on a wafer where each tile has to be smaller than a reticle. In normal chips you have a gap on all sides where the diamond saw will cut the wafer into individual dies. Having wires cross that gap requires non standard processing. And the tiles themselves would still be limited to a single reticle (under 35mm on a side), so a multi-reticle M1 would not be easy to design.
That is made in a multi-step process, as far as I understand its design, they made the point of designing it from a completely repetitive structure which is the size of one step.
> the M1 Ultra isn’t faster than an entry-level M1 chip [...] the clock speed associated with the 5nm process common to all M1 chip hasn’t changed for the M1 Ultra
It's telling that almost the only "bad" thing that you can say about the M1 Ultra is that its single threaded performance is on par with the M1, whose performance is great anyway. Apple pumped up the integration, cache size, pipeline length, branch prediction, power efficiency and what not.
I think that in terms of clock frequency increase that road is closed, and has been for 15 years already.
Realistically the only disadvantage I heard about Apple Silicon is that the GPU performance is not quite as earth-shattering as they claim.
> It's telling that almost the only "bad" thing that you can say about the M1 Ultra
The M1 is truly a great thing. It beats the pants off the Intel 2019 MBP that work gave me while I fixed some M1 problems.
That is, however, comparing Apple Intel to Apple Silicon. The 2019 Intel MBP is, on an absolute scale (vs. my own AMD laptop of the same year), completely and utterly incompetent.
Comparing Apple Silicon to Intel and AMD isn't as straightforward, and there's a lot of good and bad for all three. Apple is now merely competitive.
> I think that in terms of clock frequency increase that road is closed, and has been for 15 years already.
Possibly, except M1 runs at relatively low clock speeds of around 3.2ghz. This is in no small part how it achieves good power efficiency. It's a bit surprising that a wall powered unit is still capped at this clock speed, although whether that's intentional or just something Apple hasn't gotten around to fixing is TBD. That is, the M1 largely lacks the load-based turbo'ing that modern Intel & AMD CPUs have. So it's "stuck" at whatever it can do on all-cores & max load. This could be intentional, that is Apple may just not ever want to venture into the significantly reduced perf/watt territory of higher clock speeds & turbo complications. Or it could just be an artifact of the mobile heritage, and might be something Apple addresses with the M2, M3, etc...
> It's a bit surprising that a wall powered unit is still capped at this clock speed
The Intel/x86 mantra that desktops should be allowed to be massively inefficient just to pump up the clock speed fractionally is what's changing.
I for one, agree with Apple - 450W beasts aren't really needed. Most workflows can be (or already are) parallelized so multiple cores can demolish what a fast single-thread can tackle.
> The Intel/x86 mantra that desktops should be allowed to be massively inefficient just to pump up the clock speed fractionally is what's changing.
Nonsense. Nobody is going to just give up "free" performance.
> I for one, agree with Apple - 450W beasts aren't really needed.
Nobody makes a 450W consumer CPU, so this is a strawman. The M1 Ultra's 200W already puts it quite far beyond the typical consumer setup of 65-125W anyway.
Regardless if 450W lets your work finish faster than 200W, that's a tradeoff ~everyone makes. Nothing about that is changing.
> Most workflows can be (or already are) parallelized so multiple cores can demolish what a fast single-thread can tackle
If this is truly the case for you then you'd already be on the Threadripper/Epyc train and the M1 Ultra would be kinda boring.
> Nonsense. Nobody is going to just give up "free" performance.
No, they're done with "free" waste. Apple chips idle at far lower and due to efficiency cores, handle moderate workloads with low TDP.
> Nobody makes a 450W consumer CPU
CPU, yes. But the M1 (along with all Apple chips) is a SoC so if you include graphics, storage, memory and motherboard - you can easily eclipse 450W for many enthusiast consumer (gaming) builds. Most gaming builds are 300-500W.
> No, they're done with "free" waste. Apple chips idle at far lower and due to efficiency cores, handle moderate workloads with low TDP.
Alder Lake also has efficiency cores. And everyone has aggressive power gating & ultra low idle states, that's not something Apple came up with or innovated.
Apple's inability to turbo isn't some magic advantage. It's just a limitation, and there's no reason to believe they are happy with that limitation nor that others who don't have that limitation would for some reason copy that. Or more accurately, why would AMD & Intel regress back to where they were 5-10 years ago?
> you can easily eclipse 450W for many enthusiast consumer (gaming) builds. Most gaming builds are 300-500W.
If we're talking gaming builds then M1 Ultra is pretty much completely irrelevant as the gaming performance of the M1 Pro & Max were terrible (likely more a software problem than a hardware one, but still). The Max couldn't even keep up with a 3060 mobile. So a 300-500W desktop gaming build will be running laps around an M1 Ultra in games.
Please try to be consistent or at least explicit about whether you're including a GPU in the power numbers you are referencing; changing that context mid-sentence makes it quite hard to tell whether you really have a solid position.
But for a desktop chip like the M1 Ultra which will always be on wall power I don't see why Apple would be uncomfortable pushing the thermal envelope of the M1 architecture.
I do wonder if this will help adoption. Now the low end iphone, high end iphone, ipads (air or pro), mac mini, and everything faster has great single thread perf. The serious desktops (not including mac mini or 13" mbp) and laptops have 2x (200GB/sec), 4x (400GB/sec), or 8x (800GB/sec) memory systems that should help with CPU, AI/ML, and GPU tasks. Seems like a pretty awesome minimum level of performance to encourage developers to make the most of it.
Seems just the opposite of what Intel's doing where you might get a fast core, slow core, AVX2, AVX512, etc on a new product. Doubly so when AVX512 worked on Alder lake chips... till it was disabled by Intel.
I did hear that the m1 pro/max didn't do some GPU benchmarks particularly well, although I'm anxious waiting to hear how the M1 ultra does.
I never understand that criticism from the user point of view. A modern OS runs a lot of threads and the M1 isn't exactly a slow poke, and the M1 Ultra has a lot more cores to run all those threads.
I wonder how usable those new Apple displays will be with PCs or Linux - as they add more and more builtin chips and software.
I have an old 27" LED Cinema which I used with a PC for many many years, and then with Ubuntu native... and now back to the mac on a Mac Mini.
I'm ithcing to replace it eventually with its "double pixel density" big brother, which is essentially what this new Studio Display is (exactly double of 2560x1440). Personally I love the glass pane, and I really dislike those "anti glare" bubbly/grainy coatings I've seen on PC displays.
There’s an article[1] on The Verge where an Apple spokesperson talks about this. Apparently, you can use the camera (without Center Stage) and the display. That's it. No 3D audio, no True Tone, no updates.
Of course, the PC would need an appropriate USB-C connector with support for 5K resolution.
Now if only I could find a box with a button on it to switch the monitor between two or three computers, at full resolution, retaining Power Delivery and attached USB devices. I'd buy one right now.
Why not just pick up the LG 5k or any number of 4k displays that are cheaper (and better) then the apple 27" in the case though?
This new Studio 27" isn't really a good display on its own. It's an 8 year old panel and is missing a host of modern display upgrades like higher refresh rates, variable refresh rates, HDR, or local dimming
There is only one other monitor on the market with the pixel density and screen size equal to or greater than the Studio 27", eight year old panel or not.[0] If you want high PPI, right now, you get this, or you buy the 16:9, 60Hz 8K 32" Dell monitor and pray you can get the dual DP cables to work with your setup.
Unfortunately, Apple no longer sells the LG Ultrafine 5K [1], and no one knows if LG is even going to restock them.[2] So, you'll have to find one used, and you'll have to hope that LG continues to service this incredibly flaky series of monitors when you inevitably run into an issue.
On the flip side, if you don't care about the pixel density, you could have bought any of the low res gaming monitors, or 4k 28" monitors, or whatever other ultrawide, low PPI monstrosity the market has coughed up in the past eight years. They've been waiting this long for a reason.
You are stuck choosing between those modern features you listed and a >200ppi display. That is the state of the market right now. Until Apple solves this issue and charges you like $3,000 for the privilege later this year.[3]
The most interesting new thing going on in the M1 Ultra:
>combining multiple GPUs in a transparent fashion [is] something of a holy grail of multi-GPU design. It’s a problem that multiple companies have been working on for over a decade, and it would seem that Apple is charting new ground by being the first company to pull it off.
Not that it isn't good for the M1 but is such a setup really something other companies are attempting to pull off? It seems like GPU makers just put more cores on a single die.
Does this tech apply to discrete graphics? You can't really connect separate cards with this, right?
Are you saying this is a blow to Intel's graphics? Or maybe you're implying it's a way for integrated graphics to become dominant?
I'm not sure how Intel can ever compete in the consumer laptop market again. Apple could easily produce a knocked down M1 Macbook base model for ~$599, at which point all but the low end Chromebook market goes to them.
Well, with the pocket size of Intel, I would assume that some sort of serious research would be going on at the moment to maintain their dominance in that market.
They would fight Apple in this. They also have AMD to fight for the non-M1 chip market...
For a company used to enjoying dominance they have a lot of work to do to remain at the top.
Intel at this point is famous for blowing tons of R&D budget with little to show for it. I think the better question is if Intel can successfully eject its incompetent managers from the company.
Alder Lake is no slouch and already out. M1, and really MacOS itself, need to both be substantially better than they are already to get people to move off of Windows or Linux & x86 in general
Poking around Apple's 2021 marketshare wasn't anything particularly special, and https://www.statista.com/statistics/576473/united-states-qua... isn't showing any sort of "M1 driven spike", either. Apple's y/y growth was larger than PC's y/y growth (Annual growth for Mac was 28.3%, against 14.6% for the global PC market), but note there both are still growing. Meaning M1 didn't suddenly convert the industry.
Regardless a one year data point certainly doesn't prove a trend, certainly not of the "Apple is going to destroy Intel/AMD/Nvidia" variety.
So M1 and MacOS aren’t good enough to get people to switch but we have Mac sales increasing at almost double the PC market. Hmmm.
And fair enough to say many people won’t switch because of inertia / software lock in which is true - but that’s not because of the quality of M1 or MacOS.
i don't think Apple is particularly interested in the low end Chromebook market. It has also been largely replaced by tablets and phablets and is pretty niche nowadays.
>i don't think Apple is particularly interested in the low end Chromebook market. It has also been largely replaced by tablets and phablets and is pretty niche nowadays.
Kind of my point though; the low end isn't even worth it for PC manufacturers anymore. And by the time you get to a ~$600 laptop, you can have a cheap M1 device with 10x the performance/watt. The new M1 iPad Air starts at $700, and absolutely blows any existing Intel laptop out of the water, short of a desktop replacement gaming rig with discrete GPU.
> Surprise, Apple announced not an M2 device but a new member of the M1 family, the M1 Ultra.
Really this dod not come as a surprise to anyone interested in Apple's chips, it was rumored as "Jade-2C" for a long time. And they were not expected to release a "pro" version of M2 before the standard version for the new MacBook Air neither.
> "which points to the problem I’d have if I wanted to update my own five-year old iMac, I’d need to jettison a perfectly good display in order to move to an Apple Silicon CPU."
Is it impossible to use the 27" iMac as a display monitor for the new Mac Studio?
This sounds terrible for the consumers and for the environment as once the computer inside dies or is obsolete, you have to throw away a perfectly good display that could have a second life as an external monitor plugged into a more modern system since display technology doesn't go outdated as fast as computing.
As someone who finally bit the bullet and scrapped/curbed 2 old iMacs, yeah. It hurt a lot. Perfectly good, well-calibrated 21.5” and 27” monitors just reduced to paper weights. Plucked the ram/HDD’s and sent them on their way. I looked into every possible option for them. Such a waste.
Especially a waste since it's even the same panel as the one you're throwing away. Apple hasn't upgraded the 27" 5k for 8 years now, this new one included (lots of non-display upgrades like the camera and audio, sure, but the display itself hasn't changed)
It's terrible. The original reason Apple dropped this feature was because there wasn't an external bus that could push that many pixels. But Thunderbolt can do it now. This reuse would be more meaningful than preconsumer recycling of aluminum.
Wouldn’t an obsolete computer still be perfectly fine for less demanding users? Average Joes, poor people, a kid’s first PC, etc. — give it away, I say.
Depends on how old. My sisters old iMac ran perfectly fine but couldn’t load 75% of the internet unfortunately and most of the apps couldn’t be updated past a 5-6 year old build.
"You can use more than one iMac as a display, if each iMac is using a Thunderbolt cable to connect directly to a Thunderbolt port on the other Mac (not the other iMac)."
Do Mac's not have USB ports? It's truly bizarre that you need 1 thunderbolt port per monitor. That's an incredible amount of wasted bandwidth.
They've never supported target display mode for any of the 5k iMacs. 5k displays, in general, seem to be few and far between, and poorly supported (haven't seen a single one for PC, only Apple's offerings), so I imagine trying to support target display mode wouldn't be great.
I remember reading at the time that they couldn't reasonably get the connector throughput working. The original 5K iMacs used custom high bandwidth internal interconnects because there weren't any standard spec interconnects that could do the job, therefore no commercial external cables or connectors up to it either.
It might be possible in theory now, but I suppose that ship has sailed.
There are workarounds, like "Luna Display" (I haven't tried it and I'm not affiliated).
I also wonder how well running something like a VNC client fullscreen on the old iMac with universal control might work. (I've also used Jump Desktop's "Fluid" protocol which is the same general idea as VNC, though provided a higher-quality lower lag connection in my case.)
I think there are some decent solutions for a secondary display, but I kind of doubt any of these would be good enough for a primary display for most use cases.
I would guess all of these have tradeoffs in terms of lag, frame rate, quality, reliability, etc. though I'd love to hear different.
I looked around for something like this but finding something that can drive the panel is tricky. In my case it was an old surface studio with a 3000x2000 resolution. I think it’s actually two panels fused together and calibrated at the factory and it’s all custom. Finding a board seemed nigh impossible
Multiple dies integrated with an interconnect on a single chip is how you build big processors these days. AMD has been doing the same thing for years, and I’m sure the largest M2 will as well.
What I find interesting is that there’s no desktop Mac with an M1 Pro, leaving a gap between the entry-level M1 in the Mac mini, and the Mac Studio with its M1 Max.
For those who might not remember the full lineup: the M1 Pro and M1 Max have the same CPU part, the main difference is the number of GPU cores. For many CPU-bound applications, the Pro is all you need.
I wonder if this is an intentional strategy to sell the more expensive product or if it’s supply related.
I don't think there'll be a Mini with a Max, for exactly the reason you mentioned, but going from Pro to Max gets you more RAM, more I/O, more GPU, and more displays controller, if any of those are things you care about.
> But that is when it is completely over with Intel, AMD, Nvidia completely.
AMD is already shipping on 9 tile SoCs, and Intel is doing tile stuff, too.
Unless Apple gets back into the server game, and gets a lot more serious about MacOS, pretty much nothing Apple does makes it "game over" for Intel, AMD, or Nvidia. Especially not Nvidia who is still walking all over every GPU coming out of Apple so far, and is so ridiculously far ahead in the HPC & AI compute games it's not even funny.
Having impressive or even superior hardware does not mean that the ecosystems built up around Intel/AMD/Nvidia disappear over night. Wake me up when Metal has the same libraries that Cuda does, etc. etc.
Assuming they're on different dies, it would be the same way they connect the thousand or so pins (of an FPGA or CPU) from the die to the BGA/PGA/LGA package: interposers with wires whose widths are in the nanometer range
Same way AMD did it with their HBM GPUs. There's was 4K wires, but once you've moved to etching the wires with lithography, even millions of wires wouldn't be impossible.
The two dies and interconnect are all part of the same silicon. In the chiplets used by AMD and many others, they use separate CPU dies with literal wires between them. This replaced the wires with hard silicon.
Disadvantage of this technique is yields will be worse because the individual component is bigger, and this is limited to combining exactly two chips because it's not a ring-bus design.
So, surprise, the M1 Ultra is 2x M1 Max chips. They've been secretly planning since inception to attach 2 chips together. Why am I so unimpressed? Because connecting 2 chips together is so dang obvious. Because I would have expected Apple to connect 10 of them together in a semi-circle and not only own the desktop and mobile market, but in a truly shocking surprise, release a new Apple server that has 10x the processing power of the next most powerful server running at 1/10th the Wattage, and a new macOS server version with a footprint smaller than iOS that is binary compatible with the whole of linux development.
> release a new Apple server that has 10x the processing power of the next most powerful server running at 1/10th the Wattage
The power efficiency of M1 is vastly overstated. Reminder here that the M1 Ultra is almost certainly a 200W TDP SoC (since the M1 Max was ~100W, and this is 2x of those...)
So 10x M1 Max's would be ~1000W. That's possibly to put in a server chassis, but it's of course also not remotely 1/10th the wattage of existing server CPUs, either, which tend to be in the 250-350w range.
And interconnects aren't free, either (or necessarily even cheap). The infinity fabric connecting the dies together on Epyc is like 70w by itself, give or take.
The M1 Pro is slightly faster than other CPUs at that ~35W design point, but it doesn't scale up beyond that, or Apple just doesn't care if users can experience its latent scaling abilities, if they exist. I like this chart from "Hardware Unboxed" that puts current Apple, AMD, and Intel CPUs in context: https://imgur.com/PKHelVY
It's suspicious how the bottom point on each of those curves is exactly 35W. Real-world power measurements don't line up that cleanly, so I wouldn't be surprised if what they're graphing on that axis (for the x86 processors) is merely the power limit they set the systems to throttle to, rather than a real measurement. That or they interpolated to produce those points.
God knows what their method is, but the numbers on here for the CPU I actually own are consistent with 1) the benchmark results I see, and 2) the package power reported by the PMU, within a reasonable approximation.
Most of the x86 CPUs support setting power limits, which the CPU does actually respect with a fair degree of accuracy. They probably did that & verified it lines up.
ARM is already being heavily looked at for datacenters regardless of Apple - I do not see them entering the server market anytime soon. Their bread and butter has always been to market "Pro" devices but more at the consumer level.
Progress on this front has been going pretty well.
It's still not ready for everyday usage (though the people working on porting it might already be using it), but it's way moving a lot faster than one would guess. I'm considering a Mac Mini build machine sometime during 2022, it might be feasible for that.
Or replaced with orders for Studios. I'm not in the market for a laptop, but if I were getting a computer before last week, I probably would've gotten an m1max MBP because I always want more memory. Now, I've got a desktop option.
The delays are bad enough at the moment, it should not get worse pls.
Some are yet to receive orders placed since January for the 2021 MBP. Especially for anything beyond the base model. I wonder if they have the capacity to serve the current one going on Sales this week.
>A slightly orthogonal thought: because every word, every image of Apple Events is carefully vetted, one had to notice all six developers brought up to discuss the Mac Studio and Mac Ultra benefits inter work were women.
Well yes, the event was on March 8, International Women's Day.
The author detected an "anomaly" (see proof below) and pointed it out. I think it's pretty hostile to call such comments as bizarre, or question the author's intentions.
It seems that around 90% of developers are men[1]. Therefore, using a binomial distribution, if 6 developers were picked at random, the chance that all of them would be women (or other non men gender) is 0.0001%. (Interestingly, there is a 53% chance that all 6 of would be men).
The reason for such unlikely occurrence is that most likely, as the parent mentioned, Apple wanted to feature women developers for International Women's Day.
I'll give Gassée the benefit of the doubt. If you were ignorant of the fact that it was Women's Day (guilty here!) he might have thought it disingenuous to not mention it? At least in passing as he did.
I'm glad Apple are showcasing the diversity of their workforce (I raised three daughters of my own, wish they would have shown an interest in programming, not really) but I worry that there is a danger of backlash for going too far.
That's an extremely unfriendly thing to jump to. There was nothing in the text to suggest that.
I also noticed that every developer was from one gender and even commented to my partner at the time, at which point I remembered it was international women's day and perhaps this was Apple showing their support in an unvoiced/non-bombastic way.
Does this make me a misogynist? For noticing something?
No, not at all. Clearly, in recent years Apple's keynotes and adverts have been making a clear diversity statement, in particular an optical one, that is pretty much opposite to reality.
They've taken it so far that in a way, they've swung to the other end of the extreme. Less diversity by emphasizing diversity too much, if that makes sense.
Since discussing gender and skin color always gets people worked up, let me pick a less controversial one: wealth.
When you check Apple's adverts and see the actors using their products, they're clearly living the Valley lifestyle. They're all young, fit, filthy rich, have fantastic work spaces and living rooms, carefully designed by fashionable architects, lead an inner city lifestyle where they hop on Ubers to go to Starbucks, you get the idea.
...none of which represents even a fraction of the actual customer base. The working class is not featured, rural people are not featured, other countries are not featured, which leads me to conclude that Apple's signaling is not diverse. It's fashion for the elite, with a vast distance to their actual users.
Apple's products are desirable enough for it to not matter, but it's fine to spot it. It's hard to miss.
Just don't misread it as anything but optics. Have a look at leaked tech memos to understand how Apple really thinks. They're predatory towards competitors. They'll do anything to dodge taxes and bypass consumer protection laws. They sabotage open standards. They rely on exploitation for their manufacturing. They make secret deals so that employees can't switch. They treat their store staff as garbage.
Apple is a deeply unethical, predatory, neoconservative company. Yet if you feature lots of black women in your ads, you optically look progressive and good.
Woke capitalism from the world center of hypocrisy: California.
I agree completely. I also believe that hackernews is the exact target audience for Apple products. People who can argue that $250,000 for a non-manual, 9-5 job is somehow not a good salary.
Apple like to show people (all people from all backgrounds) as if they are normal or average rather than the hyper-elite that they are. If Apple had an advert with the average family in an average home it would probably be distressing to most people.
I'm lucky enough to be in the top 20% of earners in my country and I am in my 30s, but I still would never be able to afford a house as depicted in Apple's advertising. Or have the budget to spend $5,000 on a computer for my work.
there is quite a difference between noticing something (and then correctly noting it is international women's day) and making a strange note of it in an article that is entirely about the CPU. It really doesn't have a place there.
Where is the correct place for this "strange note"?
I think you are attaching some message to the author that wasn't there, labeling it as "strange". It was a conscious decision by Apple during a presentation that is ostensibly one long advert. The goal is for people to talk about their products and their brand and their "image". Goal achieved because here we are.
If you cannot be empathetic without directly experiencing something yourself then I would argue you actually lack empathy. Sympathy is not empathy. I can be empathetic to people I have no sympathy for.
I haven't watched the event, although, I would notice the all female cast just like I would notice the all male cast. It is a simple anomaly to have every caster to be male or female.
I'm sure you're writing in good faith, but you may be interested to know that in internet slang "noticing" is a racist and possibly sexist dog-whistle[1].
Are you implying I'm racist or sexist for using a normal word in it's usual context?
I don't particularly care if a normal word, which is in plenty of dictionaries, is co-opted by a small group of people. My friends won't know this secret meaning, my family won't know that, whatever is on the TV, Radio, or Cinema won't know that.
And now this conversation is completely off topic.
The internet is so hyper partisan that even normal, boring usage of the English language is now weaponised as shibboleths.
I find the concept of calling people out for using terms that are dog whistles quite problematic. By their very nature, dog whistles are terms in widespread innocent use, and as such the majority of the people using the term will using it in its ordinary usage in good faith. We shouldn't assume people are using these terms as dog whistles unless we have some other evidence to suggest that.
Interesting. Could you suggest how to rewrite that comment and express that a person noticed something (in the literal sense of the word) without using a dog whistle?
Interested to know this as well. I am not sure if pointing to a definition on Urban Dictionary with ~100 thumbs is enough to redefine a word let alone assume that the average person is using it as a dog whistle.
That's without even looking for a thesaurus. Not that I'm supporting this alt-definition of noticing, but your question seemed pretty trivial to answer.
Thanks, that does answer the question I wrote, however my point was that I'm very uncomfortable with this environment where any innocent word could be interpreted as a dog-whistle, and was curious if any "notice" synonyms are also considered dog-whistles.
Welcome to the "woke" world. You'll be learning a lot about what people totally unfamiliar to you do that you've also done at some point without knowing it. We're all sinners in a woke world
Varying from the corporate norm of ensuring every single bit of promotional material you have correlates with a representative sample of the population sticks out like a sore thumb. I don’t know why people are feigning shock that people found it remarkable.
Claiming misogyny at every turn shuts down discourse and actually hurts progress as people will just avoid all discussion even when it is legitimately misogyny.
Avoiding discussion just because misogyny is mentioned when misogyny is, in fact, at every turn is what actually hurts progress, as is avoiding mentioning misogyny because of people doing that. (But, of course, that's the motivation for the avoidance in the first place.)
This sort of comment isn't helpful, and you should stick to Reddit.
On a more personal level, you should query why your response to a question about why every single presenter was a woman (in the computer industry it's statistically impossible that it was a random assortment) is to accuse the questioner of being a misogynist. You're probably the same kind of person who would label a person who asks why blacks make up 14% of the population but commit 52% of the crime in the United States a racist. In neither case have you contributed anything, nor have you done anything to further the enquiries that are clearly being hinted at: Why did Apple think it was appropriate to have nothing but women presenting a keynote? Corporate virtue signalling? If blacks commit so much crime, why, and if they don't, why are the numbers inaccurate?
But of course, labelling somebody as a misogynist or a racist takes 2 brain cells and 5 seconds.
It was on international women's day, so there is no surprise why every dev was a women. What was strange is having a a weird out of place callout about it in a blogpost/article that was entirely dedicated to the tech/cpu.
> If blacks commit so much crime, why, and if they don't, why are the numbers inaccurate?
We don't know this because the figures cited are biased towards successful convictions. If white folks are able to afford better, more competent lawyers, you can expect them to mount successful defenses. I've never, ever, seen anyone post the 13/50 stat without acknowledging this fact in their comments or replies. And I've seen it a lot.
Obviously my use of this stat was to make a point apropos of the commenter I was replying to - but your response is exactly what I meant in the sense that, assuming we are both interested in talking/learning about the subject, there's a dialogue to be had. Calling me a racist would obviously do nothing except convince me that I must be right because namecalling in isolation is the ultimate white flag in internet discourse (well, so I say).
At any rate - my response is that not only are blacks exponentially more likely to be convicted, but they are exponentially more likely to be arrested in the first place (talking about per capita population here). This obviously has nothing to do with lawyers, because it's data from the stage preceding the lawyers showing up. You'll probably respond by saying that in fact the system is rigged against blacks (cops are racists, you'll say), and maybe you'll point out how NYC's stop and frisk policy disproportionately targeted young black males (the same ones who are exponentially more likely to be both arrested and convicted in the first place). You'll point out correctly that my reasoning on this point is circular, and then I might bring up the stats from both before stop and frisk, during it, and then after it was no longer city policy, to suggest some causality. I might also draw the link between IQs and crime rates (the causality of which has been demonstrated across racial groups), and I'd point out how black adults are basically a full standard deviation below the average white or Asian American. I'd also probably point out that IQ isn't something that can be changed very quickly, whether by lawyers, or nutritionists, or water filters, and that there's nothing to suggest that the IQ gap is likely to improve very quickly (and that's assuming that it's the result of environmental and not genetic factors in the first place, which isn't clear). On that note I'd also probably bring up how intelligence and personality seem to be 70-90% genetic, and the problems that fact alone ostensibly presents. You might, again (and not incorrectly), point out how 'the system' has basically been fucking blacks for the past 200 years, and that it's therefore impossible to say with certainty what they would look like in an environment without such horrendous baggage, and I'd respond that notwithstanding it being true that they've been mistreated, enslaved, and in some US states subjected to what we'd today call genocide, it doesn't change the fact that they are (apparently) both dumber than non-blacks (on average) and, as the plausible result of being significantly less intelligent, much more likely to commit violent crimes. Where would we go from there?
What an extremely unkind thing to say. There was nothing in the GP to suggest this. In fact it’s entirely plausible that Apple decided to honor women’s day this way.
You must have known that accusing people of misogyny can have a impact on their livelihood in today’s hyper PC world. That makes your comment even more unkind. I think you should apologize.
I was agreeing with the comment I replied to? that it was strange and out of place for a blog post that was entirely dedicated the tech/CPU to call out something that had nothing to do with it? (and it was a pretty obvious nod to international women's day)
Also, the style of that segment was a continuous monologue but changing speakers on each sentence. The speakers all had very similar voices, so it sounded very much like a single speaker. It was an interesting effect, though we lost the message because we started discussing whether they were processing the voices to be more similar or if Apple is just big enough to say to their customers “We need a female developer, camera ready, and her voice needs to sound like this.” and get 6 hits.
I don’t believe the author would’ve put the same emphasis on the gender ratio if it was all male speakers.
That they consider an all female group a noteworthy observation is exactly what’s antiquated about this kind of thinking. All male group? Business as usual. But fill the stage with women and suddenly it’s “saying something.” — The implication that Apple is putting them on stage to virtue signaling they’re a female lead company.
I find it hard to believe that this was a last-minute decision. Rather, I think this pattern of a new core design (using a new process if there is one) releases first for the smallest devices (iPhones), and the gradually moves its way up the lineup all the way up the Ultra before the cycle repeats with a new generation is likely Apple's new strategy going forwards.
My understanding is that this is pretty much what Intel and AMD do too (releasing their smaller dies on new processes first) and that this is a general strategy for dealing with poorer yield number on new process nodes. The idea that Apple would ever have considered releasing their biggest chip as the first chip on a new node seems far-fetched to me.