I used to code with black themes for a long time but not anymore: Why not simply lower your screen brightness ?
I feel it better for my eyes because the text which i'm looking at is actually dark and not bright.
Most people with dark themes have high brightness levels on their screens. I think this can be bad on the long term. Especially that many screen elements are not as dark as their code, which makes them ultra bright
On at least two cheap laptops I have used recently, the display driver steps down the overall display brightness when large regions of the screen are dark.
Windows 10 on an HP Stream 11, Intel integrated graphics and Intel display driver.
I can turn down the manual brightness to its minimal setting.
When large windows with white backgrounds are on screen, the backlight brightness increases. Decreases again when the windows are off screen or closed.
This does not change the manual brightness setting.
Do people also get annoyed at printed paper being white? Do they wish books had black pages? If not, as you say, it is only a matter of adjusting the screen for the proper brightness, depending on ambient light.
And it is true that, inevitably, whatever you're doing, sooner or later some white background or picture will appear on screen and blast your eyes with light. I cannot stand this, so I don't use dark themes on my PC.
A white screen with high brightness can't be compared to white paper. If you have a bright lamp behind the white paper, you can begin to compare the problem. A white screen is fine for young people without any eye problems, when you get older and start having problems with the eyes, you might need to cut down on blue light to prolong the usage of your eyes depending on what problems you get. I have to use filters to remove blue light to not make my eyes worse.
That’s why I love redshift, I shove everything way over into the red and turn the gamma right down, I also killed the overhead lights in my office so it’s a comfortable quiet cave to work in.
> Do people also get annoyed at printed paper being white?
Printed paper glowing white would indeed be very annoying.
Passive displays, such as old non-backlit LCD or e-ink, can be white and not annoying. Most people don't want to stare into a light source more than necessary.
Using proper brightness helps, and dark mode can help even more.
What's the difference between a screen emitting X light as a primary light source and a sheet of paper emitting the same exact amount of light, as a secondary light source ?
The amount of light coming to your retina stays the same..
Just lower the brightness until it matches the amount of light reflected by a sheet of paper placed next to the screen.
If you can't read the paper, turn the lights on. Being in a dark room dilates your pupils which makes them even more sensible to bright light...
I've also read that it takes more power (battery) to render black than it does white. Combined with the need for more brightness it doesn't seem like a good solution.
Calibrating my monitors took them from having piercing bluish whites to more softer pinkish whites and reduced daytime eye strain significantly.
I then use Redshift at night with the undocumented "preserve" switch to combine my icc profile with the Redshift changes.
I mean that when I build out an application / site, I build the Dark Mode first then convert the dark mode into the light mode. (Most of my users choose to use dark mode over light mode if the option is given to them)
Stylus is great when Darkreader breaks on certain sites. But when it works there are no substitutes e.g. navigating HN using the light setting in Darkreader offers a degree of customisation to create a scheme and reduce eye fatigue, without too much effort. Whereas, it can be hit and miss when trying various themes/stylesheets etc.
This has amusing effects on avatar images / pictures of faces. I wasn't quite mentally prepared for what I looked like with non-inverted colors but light shadows and dark highlights.
